STM32L151

[karthigsn]

Not Able to flash stm32L151GBU6

LoRa Module with STM32L151

http://www.rakwireless.com/en/module/lora/RAK811

Thanks

[fpistm]

Hi @karthigsn,
what did you expect exactly?
Currently, there is no variant to this module in the core.
Do you have create one and request support ?

Edit:
Seems linked to this request even if it's not the same username: rogerclarkmelbourne/Arduino_STM32#442

[karthigsn]

@fpistm

http://www.rakwireless.com/en/module/lora/RAK811

Can you help me in programming the RAK811 which has STM32L151. I could not find Generic STM32L151 in Board manager of Arduino.

Thanks
Karthi

[fpistm]

It is a module not a board like this one using STM32L052T8Y6 :
http://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-eval-tools/stm32-mcu-eval-tools/stm32-3rd-party-evaluation-tools/i-nucleo-sx1272d.html
The RAK811 module comes with a preloaded AT-Command software and it can be controlled from an external host. You have to connect it to a board and send AT command to drive it.

[sabas1080]

The RAK811 If it can be programmed, you used the IDE SW432 to do it. has the chip L151

[fpistm]

There is several doc for this module:
http://www.rakwireless.com/en/download/RAK811/Software%20Development
Also the FW upgrade tools:
http://www.rakwireless.com/en/download/RAK811/Firmware%20upgrade
Don't know if SWD pins are external.
There is a dev board to use with this module and also an Arduino library to use this module.
That's all I can do.