The homebridge-enphase-envoy plugin integrates Enphase Envoy solar energy monitoring systems with Homebridge, allowing HomeKit users to track solar production, consumption, and battery status directly in the Apple Home app. With real-time energy insights, automation possibilities, and Siri voice control, this plugin enhances smart home energy management by seamlessly connecting your Enphase Envoy system to the HomeKit ecosystem.
| Package | Installation | Role | Required |
|---|---|---|---|
| Homebridge v2.0.0 | Homebridge Wiki | HomeKit Bridge | Required |
| Homebridge UI <= v5.5.0 | Homebridge UI Wiki | Homebridge Web User Interface | Required |
| Enphase Envoy | Plug-In Wiki | Homebridge Plug-In | Required |
- Firmware v5 through v8
- System/Enpower
Envoy S,IQ Gateway,IQ Load Controller,IQ Combiner Controller - Q-Relays
Q-Relay 1PQ-Relay 3P - AC Batteries
AC Battery - Meters
Production,Consumption,Storage,Back Feed,EV Charger,PV 3P,Load - Microinverters
M215,M250,IQ6,IQ7,IQ8 - Encharges
IQ Battery 3,IQ Battery 10,IQ Battery 5P,IQ Battery 3T,IQ Battery 10T,IQ Battery 10C - WirelessKit
Communications Kit 1/2 - Generator
- System
Data Refresh - Production
State,Power State,Power Level,Energy State,Energy Level,Current,Voltage,Frequency,Power Factor - Consumption
Power State,Power Level,Energy State,Energy Level,Current,Voltage,Frequency,Power Factor - Q-Relay
State - Enpower
Grid State - Encharge:
State,Grid State,Backup Level,Dry Contacts - Solar
Grid State - Encharge Profile:
Self Consumption,Savings,Economy,Full Backup - Grid:
- Mode:
- Enpower
Grid On,Grid Off,Multimode Grid On,Multimode Grid Off,Grid Tied,Grid Forming - Encharge
Grid On,Grid Off,Multimode Grid On,Multimode Grid Off,Grid Tied,Grid Forming - Solar
Grid On,Grid Off,Multimode Grid On,Multimode Grid Off,Grid Tied,Grid Forming
- Enpower
- Quality:
- Production
Current (A),Voltage (V),Power Factor (cos Fi),Frequency (Hz) - Consumption Total
Current (A),Voltage (V),Power Factor (cos Fi),Frequency (Hz), - Consumption Net
Current (A),Voltage (V),Power Factor (cos Fi),Frequency (Hz),
- Production
- Mode:
- Generator
State,Mode
- System
Data Refresh,Lock Control - Production
State,Power Mode,Power State,Power Level - AC Battery
Energy State,Backup Level Summary,Backup Level - Enpower
Grid State,Dry Contacts - Encharge
Energy State Summary,Backup Level Summary,Energy State,Backup Level - Encharge Profile
- Self Consumption
Activate,Set Reserve - Savings
Activate,Set Reserve - Economy
Activate,Set Reserve - Full Backup
Activate
- Self Consumption
- Generator
State,Mode - PLC Level
State
- Token authentication (v7.0+) - Tokens can be generated automatically with the Enlighten username (email address) and password or external tools. Tokens generated with Enlighten credentials are automatically refreshed while those generated with external tools are not.
- Envoy
passwordis detected automatically or can be added in the configuration if already changed by user. - Installer
passwordis generated automatically (firmware < v7.0+). - Envoy
device IDis detected automatically. - Supports Production State Conrol and
PLC Level Check(firmware v7.0+ requires installer credentials). - For the best experience and to display all data, please use the
ControllerorEveapps. - External integrations include: REST and MQTT.
- Running this plugin as a Child Bridge is highly recommended. This prevents Homebridge from crashing if the plugin crashes.
- Installation and use of Homebridge UI <= v5.5.0 to configure this plugin.
- The
sample-config.jsoncan be edited and used as an alternative for advanced users.
| Key | Subkey | Type | Description |
|---|---|---|---|
name |
string | Envoy Enphase Gateway accessory name to be displayed in Home app | |
host |
string | The Envoy Enphase Gateway IP Address or Hostname. If not supplied, defaults to envoy.local. For firmware v7.0+, please set the IP Address. |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Light Bulb, 2 - Fan, 3 - Humidity Sensor, 4 - Carbon Monoxide Sensor |
|
envoyFirmware7xxTokenGenerationMode |
number | How you will obtain the token: 0 - Envoy Password (firmware < v7.0), 1 - Enlighten Credentials, 2 - Your Own Generated Token |
|
envoyPasswd |
string | Envoy password (only if U already changed the default password) | |
enlightenUser |
string | Enlighten username | |
enlightenPasswd |
string | Enlighten password | |
envoyToken |
string | Token if you selected 2 - Your Own Generated Token for envoyFirmware7xxTokenGenerationMode |
|
envoyTokenInstaller |
boolean | Enable if you are using the installer token | |
lockControl |
key | Lock Control for enable?disable system control |
|
lockControl.enable |
boolean | Enables system control auto lock accessory | |
lockControl.time |
number | System Auto Lock Control time (seconds) |
|
lockControl.namePrefix |
boolean | Use accessory name for prefix | |
energyMeter |
boolean | Enables energy meter as a axtra accessory to display charts in EVE app | |
productionStateSensor |
key | Production State Sensor for production state monitoring |
|
name |
string | Accessory name for Home app | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
plcLevelControl |
key | PLC Level Control for PLC level check (firmware v7.0+ require installer credentials) |
|
name |
string | Accessory name for Home app | |
displayType |
number | Accessory type for Home app: 0 - None/Disabled, 1 - Switch, 2 - Outlet, 3 - Lightbulb |
|
namePrefix |
boolean | Use accessory name for prefix | |
powerProductionSummary |
number | Power Summary, in W, of all microinverters. This will be used to calculate the display power level in the Home app 0-100 % |
|
powerProductionLevelSensors |
key | Power Level Sensor for production monitoring |
|
name |
string | Accessory name for Home app | |
compareMode |
string | Comparison mode: <, <=, ==, >, >=, != |
|
powerLevel |
number | Power production level in W to compare to sensor that was triggered |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
energyProductionLifetimeOffset |
number | Energy Offset in Wh for production (if needed) +/- |
|
energyProductionLevelSensors |
key | Energy Level Sensor for production monitoring |
|
name |
string | Accessory name for Home app | |
compareMode |
string | Comparison mode: <, <=, ==, >, >=, != |
|
energyLevel |
number | Energy production level in Wh to compare to sensor that was triggered |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
gridProductionQualitySensors |
key | Power Level Sensor for production monitoring |
|
name |
string | Accessory name for Home app | |
compareMode |
string | Comparison mode: <, <=, ==, >, >=, != |
|
compareType |
string | Comparison type: Current, Voltage, Frequency, Power Factor |
|
compareLevel |
number | Level to compare to sensor that was triggered | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
powerConsumptionTotalLevelSensors |
key | Power Level Sensor for total consumption monitoring |
|
name |
string | Accessory name for Home app | |
compareMode |
string | Comparison mode <, <=, ==, >, >=, != |
|
powerLevel |
number | Total power consumption level in W to compare to power level sensor that was triggered |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
energyConsumptionTotalLifetimeOffset |
number | Energy Offset in Wh for total consumption (if needed) +/- |
|
energyConsumptionTotalLevelSensors |
key | Energy Level Sensor for total consumption monitoring |
|
name |
string | Accessory name for Home app | |
compareMode |
string | Comparison mode <, <=, ==, >, >=, != |
|
energyLevel |
number | Energy level total in Wh to compare to sensor that was triggered |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
gridConsumptionTotalQualitySensors |
key | Power Level Sensor for production monitoring |
|
name |
string | Accessory name for Home app | |
compareMode |
string | Comparison mode: <, <=, ==, >, >=, != |
|
compareType |
string | Comparison type: Current, Voltage, Frequency, Power Factor |
|
compareLevel |
number | Level to compare to sensor that was triggered | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
powerConsumptionNetLevelSensors |
key | Power Level Sensor for net power consumption level monitoring |
|
name |
string | Accessory name for Home app | |
compareMode |
string | Comparison mode <, <=, ==, >, >=, != |
|
powerLevel |
number | Net power consumption power level in W to compare for the sensor that was triggered |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
energyConsumptionNetLifetimeOffset |
number | Energy Offset in Wh for consumption Net (if needed) +/- |
|
energyConsumptionNetLevelSensors |
key | Energy Level Sensor for net consumption monitoring |
|
name |
string | Accessory name for Home app | |
compareMode |
string | Comparison mode <, <=, ==, >, >=, != |
|
energyLevel |
number | Net energy comsumption level in Wh to compare to sensor that was triggered |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
gridConsumptionNetQualitySensors |
key | Power Level Sensor for production monitoring |
|
name |
string | Accessory name for Home app | |
compareMode |
string | Comparison mode: <, <=, ==, >, >=, != |
|
compareType |
string | Comparison type: Current, Voltage, Frequency, Power Factor |
|
compareLevel |
number | Level to compare to sensor that was triggered | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
qRelayStateSensor |
key | Q-Relay State Sensor for monitoring. If State ON, the contact was opened. |
|
name |
string | Accessory name for Home app | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
multiphase |
boolean | Enables multiphase support, if present | |
acBatterieName |
string | AC Bettery Accessory name for Home app, if not set will use default name | |
acBatterieBackupLevelSummaryAccessory |
key | AC Batteries Backup Level Summary Accessory in Home app, if present |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Light Bulb, 2 - Fan, 3 - Humidity Sensor, 4 - Carbon Monoxide Sensor, 5 - Battery |
|
minSoc |
boolean | Minimum SoC level in (%) for ac batteries backup level summary | |
acBatterieBackupLevelAccessory |
key | AC Battery Backup Level Accessory in Home app, if present |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Light Bulb, 2 - Fan, 3 - Humidity Sensor, 4 - Carbon Monoxide Sensor, 5 - Battery |
|
minSoc |
boolean | Minimum SoC level in (%) for ac battery backup level | |
enpowerGridStateControl |
key | Enpower Grid State Control for Grid ON/OFF control from HomeKit |
|
name |
string | Accessory name for Home app | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Switch, 2 - Outlet, 3 - Lightbulb |
|
namePrefix |
boolean | Use accessory name for prefix | |
enepowerGridStateSensor |
key | Enpower Grid State Sensor for monitoring. If Grid ON, the contact was opened. |
|
name |
string | Accessory name for Home app | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
enpowerGridModeSensors |
key | Enpower Grid Mode Sensors for monitoring. If the Mode matches, the contact was opened. |
|
name |
string | Accessory name for Home app | |
gridMode |
string | Grid mode: Grid On, Grid Off, Multimode Grid On, Multimode Grid Off, Grid Tied, Grid Forming |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
enchargeName |
string | Encharge Accessory name for Home app, if not set will use default name | |
enchargeBackupLevelSummaryAccessory |
key | Encharge Backup Level Summary Accessory in Home app, if present |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Light Bulb, 2 - Fan, 3 - Humidity Sensor, 4 - Carbon Monoxide Sensor, 5 - Battery |
|
minSoc |
boolean | Minimum SoC level in (%) for encharges backup level summary | |
enchargeBackupLevelAccessory |
key | Encharge Backup Level Accessory in Home app, if present |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, , 1 - Battery |
|
minSoc |
boolean | Minimum SoC level in (%) for encharges backup level summary | |
enchargeStateSensor |
key | Encharge State Sensor for monitoring. If State ON, the contact was opened. |
|
name |
string | Accessory name for Home app | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
enchargeProfileControls |
key | Encharge Profile Controls for Profile control from HomeKit |
|
name |
string | Accessory name for Home app | |
profile |
string | Profile: Savings, Economy, Full Backup, Self Consumption |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Lightbulb |
|
chargeFromGrid |
boolean | Allow charge from grid | |
namePrefix |
boolean | Use accessory name for prefix | |
enchargeProfileSensors |
key | Encharge Profile Sensors for monitoring. If the Profile matches, the contact was opened. |
|
name |
string | Accessory name for Home app | |
profile |
string | Profile: Savings, Economy, Full Backup, Self Consumption |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
enechargeGridStateSensor |
key | Encharge Grid State Sensor for monitoring. If Grid ON, the contact was opened. |
|
name |
string | Accessory name for Home app | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
enchargeGridModeSensors |
key | Encharge Grid Mode Sensors for monitoring. If the Mode matches, the contact was opened. |
|
name |
string | Accessory name for Home app | |
gridMode |
string | Grid mode: Multimode Grid On, Multimode Grid Off |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
enchargeBackupLevelSensors |
key | Encharge Backup Level Sensors for monitoring. If the Level matches, the contact was opened. |
|
name |
string | Accessory name for Home app | |
compareMode |
string | Comparison mode: <, <=, ==, >, >= |
|
backupLevel |
number | Backup level in % to compare to sensor that was triggered |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
solarGridStateSensor |
key | Solar Grid State Sensor for monitoring. If Grid ON, the contact was opened. |
|
name |
string | Accessory name for Home app | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
solarGridModeSensors |
key | Solar Grid Mode Sensors for monitoring. If the Mode matches, the contact was opened. |
|
name |
string | Accessory name for Home app | |
gridMode |
string | Grid mode: Grid On, Grid Off, Multimode Grid On, Multimode Grid Off, Grid Tied, Grid Forming |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
enpowerDryContactsControl |
boolean | Enables Dry Contacts control and exposes Switches in Home app |
|
enpowerDryContactsSensor |
boolean | Enables Dry Contacts monitoring and exposes Sensors in Home app |
|
generatorStateControl |
key | Generator State Control for Generator OFF/ON control in Home app |
|
name |
string | Accessory name for Home app | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Switch, 2 - Outlet, 3 - Lightbulb |
|
namePrefix |
boolean | Use accessory name for prefix | |
generatorStateSensor |
key | Generator State Sensor for State monitoring. If State not Off, the contact was opened. |
|
name |
string | Accessory name for Home app | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
generatorModeContol |
key | Generator Mode Control, for Generator OFF/ON/AUTO control in Home app |
|
name |
string | Accessory name for Home app | |
mode |
string | Grid mode: Off, On, Auto |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Switch, 2 - Outlet, 3 - Lightbulb |
|
generatorModeSensors |
key | Generator Mode Sensors for monitoring, if the Mode matches, the contact was opened. |
|
name |
string | Accessory name for Home app | |
mode |
string | Grid mode: Off, On, Auto |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
acBatterieBackupLevelAccessory |
key | AC Battery Backup Level Accessory in Home app, if present |
|
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, , 1 - Battery |
|
minSoc |
boolean | Minimum SoC level in (%) for ac battery backup level summary | |
dataRefreshControl |
key | Data Refresh Control from HomeKit. |
|
name |
string | Accessory name for Home app | |
displayType |
number | Here select the tile type to be displayed in Home app: 0 - None/Disabled, 1 - Switch, 2 - Outlet, 3 - Lightbulb |
|
namePrefix |
boolean | Use accessory name for prefix | |
dataRefreshSensor |
key | Data Refresh Sensor for monitoring. If operating, the contact was opened. |
|
name |
string | Accessory name for Home app | |
displayType |
number | Accessory type to be displayed in Home app: 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor |
|
namePrefix |
boolean | Use accessory name for prefix | |
productionDataRefreshTime |
number | Production Data refresh time (seconds) |
|
liveDataRefreshTime |
number | Live Data refresh time (seconds) |
|
ensembleDataRefreshTime |
number | Ensemble Data refresh time (seconds) |
|
log |
key | Log from HomeKit. |
|
deviceInfo |
boolean | If enabled, log device info will be displayed by every connections device to the network. | |
success |
boolean | If enabled, success log will be displayed in console. | |
info |
boolean | If enabled, info log will be displayed in console. | |
warn |
boolean | If enabled, warn log will be displayed in console. | |
error |
boolean | If enabled, error log will be displayed in console. | |
debug |
boolean | If enabled, debug log will be displayed in console. | |
restFul |
key | REST service | |
enable |
boolean | Enables REST service to start automatically and respond to any request | |
port |
number | Port for REST service |
|
mqtt |
key | MQTT broker | |
enable |
boolean | Enables MQTT broker to start automatically and publish available data | |
host |
string | IP Address or Hostname for MQTT Broker |
|
port |
number | Port for MQTT broker (default to 1883) |
|
clientId |
string | Client Id of MQTT broker (optional) |
|
prefix |
string | Prefix for Topic (optional) |
|
auth |
boolean | Enables MQTT broker authorization credentials | |
user |
string | MQTT broker user | |
passwd |
string | MQTT Broker password |
REST POST calls must include a content-type header of application/json.
Path status response all available paths.
| Method | URL | Path | Response | Type |
|---|---|---|---|---|
| GET | http//ip:port |
token, info, home, homedata, inventory, microinvertersstatus, meters, metersreading, metersreports, detaileddevicesdata, microinvertersdata, qrelaysdata, metersdata, production, productionpdm, energypdm, productionct,powerandenergydata, acbatterydata, ensembleinventory, ensemblestatus, ensemblepower, enchargesettings, tariff, drycontacts, drycontactssettings, generator, generatorsettings, ensembledata, gridprofile, livedata, livedatadata, productionstate, plclevel, datasampling. |
{wNow: 2353} |
JSON |
| Method | URL | Key | Value | Type | Description |
|---|---|---|---|---|---|
| POST | http//ip:port |
DataSampling |
true, false |
boolean | Data sampling Start/Stop |
http//ip:port |
PowerProductionState |
true, false |
boolean | Production state On/Off | |
http//ip:port |
PlcLevel |
true |
boolean | Check Plc Level On | |
http//ip:port |
EnchargeProfile |
self-consumption, savings-mode, economy, backup |
string | Set encharge profile | |
http//ip:port |
EnchargeReservedSoc |
0-100 |
number | Set encharge reserve SoC 0-100% | |
http//ip:port |
EnchargeChargeFromGrid |
true, false |
boolean | Set encharge charge from grid On/Off | |
http//ip:port |
EnpowerGridState |
true, false |
boolean | Grid state On/Off | |
http//ip:port |
GeneratorMode |
off, on, auto |
string | Generator mode Off/On/Auto |
Subscribe using JSON { "EnchargeProfile": "savings" }
| Method | Topic | Message | Type |
|---|---|---|---|
| Publish | Token, Info, Home, Home Data, Inventory, Microinverters Status, Meters, Meters Reading, Meters Reports, Detailed Devices Data, Microinverters Data, Q-Relays Data, Meters Data, Production, Production Pdm, Energy Pdm, Production CT, Power And Energy Data, AC Battery Data, Ensemble Inventory, Ensemble Status, Ensemble Status, Encharge Power, Tariff, Dry Contacts, Dry Contacts Settings, Generator, Generator Settings, Ensemble Data, Grid Profile, Live Data, Live Data Data, Production State, PLC Level, Data Sampling |
{wNow: 2353} |
JSON |
| Method | Topic | Key | Value | Type | Description |
|---|---|---|---|---|---|
| Subscribe | Set |
DataSampling |
true, false |
boolean | Data sampling Start/Stop |
Set |
ProductionState |
true, false |
boolean | Production state On/Off | |
Set |
PlcLevel |
true |
boolean | Check Plc Level On | |
Set |
EnchargeProfile |
self-consumption, savings-mode, economy, backup |
string | Set encharge profile | |
Set |
EnchargeReservedSoc |
0-100 |
number | Set encharge reserve SoC 0-100% | |
Set |
EnchargeChargeFromGrid |
true, false |
boolean | Set encharge charge from grid On/Off | |
Set |
EnpowerGridState |
true, false |
boolean | Grid state On/Off | |
Set |
GeneratorMode |
off, on, auto |
string | Generator mode Off/On/Auto |