fix S3 flash image base #6208
Merged
fix S3 flash image base #6208
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
Thanks @Jason2866 :) |
VojtechBartoska
added
the
Chip: ESP32-S3
Jason2866
added a commit
to Jason2866/arduino-esp32
that referenced
this pull request
Feb 4, 2022
* Fix wdt OTA update * Fix ESP32-Solo WDT on HTTP OTA update Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com> * Fix ESP32-Solo WDT on HTTP OTA update * Fix ESP32-Solo WDT on HTTP OTA update Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com> * IDF master c69f0ec32 * Fix WDT only for solo core * IDF master 58022f859 * IDF master 606557b48 * IDF master 8131d6f46 * IDF master 59aa60d52 * IDF master 83956ebba * IDF master 83956ebbae * IDF master b1c3ee71c5 * IDF master 2c49af9e75 * IDF master eb1a66e7c9 * IDF master a20df743f1 * Fix build compilation due to changes in the HW_TIMER's structs * Fix compilation warnings and errors with USB * Update USBCDC.cpp * Update CMakeLists.txt * IDF master b63ec47238 * Update libarduino_tinyusb.a * Update HWCDC.cpp * IDF master 5f38b766a8 * IDF master b1f851b8f8 * IDF master 61299f879e * Delete tools/sdk/esp32/include/coap directory * Delete tools/sdk/esp32c3/include/coap directory * Delete tools/sdk/esp32s2/include/coap directory * solve conflicts * force Dynamic Buffer instead of Static ones * Remove debug if * Resolve conflicts * Revert espressif#5861 * add GPIO defines for C3 * Edit sd_diskio to check card status * Update CMakeLists.txt * Delete libraries/RainMaker directory * Update README.md * Update README.md * Revert "RMT refactor" * Fixes Lib Builder compiling errors * Fixes Lib Builder compiling errors * Revert "Revert "RMT refactor"" * Update esp32-hal-rmt.c * Update esp32-hal-rmt.c * Update esp32-hal-rmt.c * Update esp32-hal-rmt.c * Update esp32-hal-gpio.c * Bugfix of ff_sd_status * Fix I2C Slave Compile I2C Slave currently doesn't compile for projects where Arduino is an IDF component. This adds missing conditionals. * add missing c3 define when disable HAL lock is set * add ESP32C3 `esp32_adc2gpio` * Fixes UART MODBUS and Loopback issue * Update esp32-hal-uart.c * Revert "Fixing interrupts in LEDC (espressif#6160)" This reverts commit a593206. * Update esp32-hal.h * use Tasmota github * Use Tasmota platform for CI * tasmota eaptool v3.2 * add missing c3 define * enable SPI hal for S3 * revert enable spi for S3 * Update Esp.cpp * Update Esp.cpp * fix S3 uart gpios * fix S3 flash image base (espressif#6208) * Added my new Unexpected Maker ESP32-S3 boards (espressif#6211) * Fixes UART1 and UART2 default pins for ESP32-S3 (espressif#6202) Summary This PR fixes an issue with UART1 default pins. When using pins RX_1 = 18 and TX_1 = 17, UART1 will display a Break Error on those pins when they are floting (not connected). It also defines RX_2 = 19 and TX_2 = 20 as default pins for UART2. Impact The deaulf pins may look different from the original pinout diagram. * Fix - SD mount issue (espressif#6162) * sdSelectCard longer timeout for sdWait * GO_IDLE_STATE command ignores sdWait fail * fix: restoring handshake timeout (espressif#6165) (espressif#6166) * Use 8.4.0+2021r2-patch2 toolchains for CI (espressif#6184) with platformio * Fixes onReceive deadlock (espressif#6201) * added explanatory comments to WebServer.h (espressif#6204) * Add conditional include to WiFiProv.h (espressif#6192) Resolves issue espressif#6171 * Resolve WString TODO (espressif#6190) Resolve TODO (XXX) by logging warning message. * Allow HTTPCLIENT_1_1_COMPATIBLE to be disabled (espressif#6200) Allow a user to disable the HTTPCLIENT_1_1_COMPATIBLE flag from the command line, or whichever means available. * Update RequestHandlersImpl.h (espressif#6179) With LittleFS the `fs.exists(path)` returns true also on folders. A `isDirectory()` call is required to set _isFile to false on directories. This enables serving all files from a folder like : `server->serveStatic("/", LittleFS, "/", cacheHeader.c_str()); File f = fs.open(path); _isFile = (f && (! f.isDirectory())); * Refactor the CI scripts (espressif#6191) The reason behind this refactoring is that all of the sketch related functions can (and will) be used for other purposes. Build in the sketch directory: This will make it easy to handle artifacts after the build. Separate sketch related functions from IDE installation script. This is the main commit. Create a separate job for the Cmake check. This check was part of one of the Linux build. I believe that it's not the best place for such a check. Checking for the skip landmarks and validity of the the sketch directory were already done by count_sketches. * Fixes UART_1 TX Pin setup When passing the PR to this branch, it seems that the change to this line was forgotten. * Fix random CaptivePortal.ino crashes (espressif#6206) CaptivePortal.ino example did randomly crash for me ... so I start investigate ;-) Decoding stack results 0x4016faea: WiFiUDP::write(unsigned char const*, unsigned int) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\libraries\WiFi\src\WiFiUdp.cpp line 201 0x400d4a4a: DNSServer::replyWithIP() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 187 0x400d4d01: DNSServer::processNextRequest() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 117 0x400d3e81: loop() at D:\Drive\Dokumente\HTL_Lehrer\2021_22\Projekte\Stromzaehler_Patrick\arduino/arduino.ino line 1078 0x400dd545: loopTask(void*) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\cores\esp32\main.cpp line 37 0x4008a0de: vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/port.c line 143 I found with wireshark a possibility to trigger the crash on demand is: nslookup 3.1o1osr0092ons87rp375p1pq8q066o8p56or1sqsps6rs17r4384q9748qr1r52.699p1r741q737393648s29917o45p16q50rn517rnsp73pp68p1q259s92693qp.s607408539s0p06p7559os0899866344r7qq7rpns960o9576q65.r5n94r5so9784pq1.i.03.s.sophosxl.net The problem was that QNameLength is a signed byte and therefore its not possible to count up to 255. Additionally we need 256 bytes for the QName string to accommodate for the zero termination. * Update HardwareSerial.cpp * Update Esp.cpp * Update Esp.cpp * Bootloader is at 0x0000 for S3 * Initial SPI support and S3-Box variant * Docs cleanup and version updated to 2.0.2 (espressif#6213) * Docs cleanup and version updated to 2.0.2 * Removed issue template information * Removed issue template file * Added referecnces for the issue and feature request form * Bootloader is at 0x0000 for S3 (espressif#6215) * Update esp32-hal-cpu.c * Update esp32-hal-spi.c * Unnecessary operation removed from map() in WMath.cpp (espressif#6218) * Unneccesary Operation Removed (A) extra operation not needed and incorrect: wrong by 0.5 but happens to be thrown out ( delta * dividend + (divisor / 2) ) / divisor delta * dividend divisor = ---------------- + ----------- divisor 2 * divisor = delta * dividend / divisor + 1/2 (B) check first before doing other computations (C) changed to rise/run, easier for future maintainer since it's closer to equation of a line (D) before: mult, shift, add, div, add now: mult, div, add (E) error message easier to trace where thrown * Update WMath.cpp forgot to change variable name * framebuffer location for no-psram boards (espressif#6219) If board has no PSRAM, we need to set the framebuffer location to DRAM: config.fb_location = CAMERA_FB_IN_DRAM; * Update install-platformio-esp32.sh * small adjustments for NVS and PSRAM init * WIP: Initial support for PSRAM (QSPI and OPI) * Fix replace() failing * Touch Sensor IDF Refactoring (espressif#6194) Summary Touch Sensor refactoring to be based on IDF 4.4. Adds support to ESP32S2 and future ESP32S3. Adds some new APIs: For all chips: void touchAttachInterruptArg(uint8_t pin, void (*userFunc)(void*), void *arg, uint32_t threshold); This function allows the user to add and pass a void* parameter to the ISR user callback. void touchDetachInterrupt(uint8_t pin); This function detaches ISR call back for the touch pad pin. Only ESP32 chip void touchInterruptSetThresholdDirection(bool mustbeLower); This function allows the user to set if the ISR callback will be activated when the touch sensor readings are lower or higher than the threshold defined. See example TouchButton.ino. Only ESP32-S2 and ESP32-S3 chips bool touchInterruptGetLastStatus(uint8_t pin); This function reports if the touch pad pin is touched or untouched. It can be used with ISR to identify when it is touched and untouched (released). See example TouchButtonV2.ino. Impact None. ll original APIs and examples now run on ESP32 and ESP32-S2. Related links Fix espressif#6095 Fix espressif#6034 Fix espressif#5799 Fix espressif#5745 Fix espressif#5527 Fix espressif#5493 Fix espressif#4321 Fix espressif#4044 Fix espressif#2722 Fix espressif#2625 * [FEATURE] Basic implementation of Arduino's I2S library (espressif#5304) Basic version of Arduino's I2S library. We currently support only 16bps + 16000 Hz sampling frequency. Other bitrates and sample rates will print warning and continue to operate, however the resulting audio quality may be poor. There will be further effort to fix these issues. * Update CMakeLists.txt * remove Rainmaker * [I2S] Fix lib-builder error * Update CMakeLists.txt * try to find lib builder fail * Update CMakeLists.txt * Update idf_component.yml Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com> Co-authored-by: me-no-dev <me-no-dev@users.noreply.github.com> Co-authored-by: me-no-dev <hristo@espressif.com> Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com> Co-authored-by: Jason2866 <jason2866@github.com> Co-authored-by: Rodrigo Garcia <Rodrigo.Garcia@espressif.com> Co-authored-by: mrengineer7777 <44048235+mrengineer7777@users.noreply.github.com> Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com> Co-authored-by: Vlasta Hajek <vlastimil.hajek@bonitoo.io> Co-authored-by: Enes Şimşek <62627966+h-enes-simsek@users.noreply.github.com> Co-authored-by: Clemens Kirchgatterer <clemens@1541.org> Co-authored-by: Matthias Hertel <mathertel@hotmail.com> Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> Co-authored-by: Patrick Behal <5472845+im-pro-at@users.noreply.github.com> Co-authored-by: Pedro Minatel <pminatel@gmail.com> Co-authored-by: IanSC <8453489+IanSC@users.noreply.github.com> Co-authored-by: René Bohne <rene.bohne@gmail.com> Co-authored-by: s-hadinger <49731213+s-hadinger@users.noreply.github.com> Co-authored-by: Tomáš Pilný <34927466+PilnyTomas@users.noreply.github.com>
Jason2866
added a commit
to tasmota/arduino-esp32
that referenced
this pull request
Mar 30, 2022
* Initial S3 Support Just so we can compile and test! Some things might/will not work. SPI and UART baud detect need to be looked at. * Add S3 Toolchain * Update Esptool and add some missing adjustments * Add Dual-Core Support * Fix bootloop issue and enable DSP optimization * Run Arduino on Core1 * Rework USB selection * Update HWCDC.cpp * Update USB.cpp * Update esp32-hal-tinyusb.c * fix S3 flash image base (espressif#6208) * Added my new Unexpected Maker ESP32-S3 boards (espressif#6211) * Fixes UART_1 TX Pin setup When passing the PR to this branch, it seems that the change to this line was forgotten. * Initial SPI support and S3-Box variant * Bootloader is at 0x0000 for S3 (espressif#6215) * small adjustments for NVS and PSRAM init * WIP: Initial support for PSRAM (QSPI and OPI) * [FEATURE] Basic implementation of Arduino's I2S library (espressif#5304) Basic version of Arduino's I2S library. We currently support only 16bps + 16000 Hz sampling frequency. Other bitrates and sample rates will print warning and continue to operate, however the resulting audio quality may be poor. There will be further effort to fix these issues. * [I2S] Fix lib-builder error * Update idf_component.yml (espressif#6232) took me a while * Fixes RMT examples and adds ESP32-S3 config (espressif#6235) * WIP: Initial OPI support * Update Libs with the new lib-builder scripts * Update board menu for ESP32-S3 * fix ethernet clock runtime setting (espressif#6340) this was not possible anymore since the GPIO refactoring. This superseeds espressif/esp32-arduino-lib-builder#60 (which works only for clock on GPIO17). A PR will provided to revert this. @me-no-dev fyi The fix is done from @arendst Credits go to him! * Update IDF libs and fix missing BLE 4.2 features * Update CI scripts * script fixes * Add guard to USB examples * Disable some examples for ESP32-S3 * skip one more sketch and try again PIO * Fox SPI example and add proper esptool for PIO CI * Update ResetReason.ino * Update IDF, Add ESP-SR and RainMaker * Enable RainMaker on all chips * Enable hardware test on ESP32-S3 * Adjust build dir for tests and sketches * Update tests_build.sh * Send event also if tests fail * Add helper script for updating the core version * [Docs] Added/Updated Lib builder docs (espressif#6401) * [Docs] Added/Updated Lib builder docs * [Docs] Fixes according to the PR review * [Docs] Fixes according to the PR review * SD_MMC: add ESP32-S3 support * CmakeList + Rainmaker src files edit * remove Rainmaker * Tasmota change * Fix Unicore WDT on HTTP OTA update * Revert "ESP32-S3 SDMMC support" (#20) * Fix reboot into download from TinyUSB on ESP32-S3 Requires manual reboot back into the new firmware after flashing has finished * Fix psram crash pico d4 (#110) * Fix reboot into download from TinyUSB on ESP32-S3 (#111) Requires manual reboot back into the new firmware after flashing has finished Co-authored-by: me-no-dev <hristo@espressif.com> * Revert "Fix psram crash pico d4 (#110)" (#113) This reverts commit 56cf555. * Fix boot freeze when trying to init PSRAM on Pico D4 * revert tinyusb * hal/usb_serial_jtag_ll.h only C3, H2, S3 * Fix sd mmc * add wpa_supplicant as requirement * Update platform.txt * remove Rainmaker * Update boards.txt * Update HardwareSerial.h * Update USBCDC.cpp * Update esptool.py * Update platformio-build-esp32.py * Update platformio-build-esp32c3.py * Update platformio-build-esp32s2.py * Update platformio-build-esp32s3.py * fix merge errors * Reordering - HardwareSerial Constructor * Update platformio-build-esp32.py * Update platformio-build-esp32c3.py * Update platformio-build-esp32s2.py * Update platformio-build-esp32s3.py Co-authored-by: me-no-dev <hristo@espressif.com> Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com> Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com> Co-authored-by: Tomáš Pilný <34927466+PilnyTomas@users.noreply.github.com> Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com> Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com> Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Jason2866
added a commit
to tasmota/arduino-esp32
that referenced
this pull request
Mar 30, 2022
* Initial S3 Support Just so we can compile and test! Some things might/will not work. SPI and UART baud detect need to be looked at. * Add S3 Toolchain * Update Esptool and add some missing adjustments * Add Dual-Core Support * Fix bootloop issue and enable DSP optimization * Run Arduino on Core1 * Rework USB selection * Update HWCDC.cpp * Update USB.cpp * Update esp32-hal-tinyusb.c * fix S3 flash image base (espressif#6208) * Added my new Unexpected Maker ESP32-S3 boards (espressif#6211) * Fixes UART_1 TX Pin setup When passing the PR to this branch, it seems that the change to this line was forgotten. * Initial SPI support and S3-Box variant * Bootloader is at 0x0000 for S3 (espressif#6215) * small adjustments for NVS and PSRAM init * WIP: Initial support for PSRAM (QSPI and OPI) * [FEATURE] Basic implementation of Arduino's I2S library (espressif#5304) Basic version of Arduino's I2S library. We currently support only 16bps + 16000 Hz sampling frequency. Other bitrates and sample rates will print warning and continue to operate, however the resulting audio quality may be poor. There will be further effort to fix these issues. * [I2S] Fix lib-builder error * Update idf_component.yml (espressif#6232) took me a while * Fixes RMT examples and adds ESP32-S3 config (espressif#6235) * WIP: Initial OPI support * Update Libs with the new lib-builder scripts * Update board menu for ESP32-S3 * fix ethernet clock runtime setting (espressif#6340) this was not possible anymore since the GPIO refactoring. This superseeds espressif/esp32-arduino-lib-builder#60 (which works only for clock on GPIO17). A PR will provided to revert this. @me-no-dev fyi The fix is done from @arendst Credits go to him! * Update IDF libs and fix missing BLE 4.2 features * Update CI scripts * script fixes * Add guard to USB examples * Disable some examples for ESP32-S3 * skip one more sketch and try again PIO * Fox SPI example and add proper esptool for PIO CI * Update ResetReason.ino * Update IDF, Add ESP-SR and RainMaker * Enable RainMaker on all chips * Enable hardware test on ESP32-S3 * Adjust build dir for tests and sketches * Update tests_build.sh * Send event also if tests fail * Add helper script for updating the core version * [Docs] Added/Updated Lib builder docs (espressif#6401) * [Docs] Added/Updated Lib builder docs * [Docs] Fixes according to the PR review * [Docs] Fixes according to the PR review * SD_MMC: add ESP32-S3 support * CmakeList + Rainmaker src files edit * remove Rainmaker * Tasmota change * Fix Unicore WDT on HTTP OTA update * Revert "ESP32-S3 SDMMC support" (#20) * Fix reboot into download from TinyUSB on ESP32-S3 Requires manual reboot back into the new firmware after flashing has finished * Fix psram crash pico d4 (#110) * Fix reboot into download from TinyUSB on ESP32-S3 (#111) Requires manual reboot back into the new firmware after flashing has finished Co-authored-by: me-no-dev <hristo@espressif.com> * Revert "Fix psram crash pico d4 (#110)" (#113) This reverts commit 56cf555. * Fix boot freeze when trying to init PSRAM on Pico D4 * revert tinyusb * hal/usb_serial_jtag_ll.h only C3, H2, S3 * Fix sd mmc * add wpa_supplicant as requirement * Update platform.txt * remove Rainmaker * Update boards.txt * Update HardwareSerial.h * Update USBCDC.cpp * Update esptool.py * Update platformio-build-esp32.py * Update platformio-build-esp32c3.py * Update platformio-build-esp32s2.py * Update platformio-build-esp32s3.py * fix merge errors * Reordering - HardwareSerial Constructor * Update platformio-build-esp32.py * Update platformio-build-esp32c3.py * Update platformio-build-esp32s2.py * Update platformio-build-esp32s3.py * Update pins_arduino.h * Update platformio-build-esp32.py * Update platformio-build-esp32c3.py * Update platformio-build-esp32s2.py * Update platformio-build-esp32s3.py Co-authored-by: me-no-dev <hristo@espressif.com> Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com> Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com> Co-authored-by: Tomáš Pilný <34927466+PilnyTomas@users.noreply.github.com> Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com> Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com> Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Jason2866
added a commit
to tasmota/arduino-esp32
that referenced
this pull request
Mar 31, 2022
* Tasmota changes (#123) * Initial S3 Support Just so we can compile and test! Some things might/will not work. SPI and UART baud detect need to be looked at. * Add S3 Toolchain * Update Esptool and add some missing adjustments * Add Dual-Core Support * Fix bootloop issue and enable DSP optimization * Run Arduino on Core1 * Rework USB selection * Update HWCDC.cpp * Update USB.cpp * Update esp32-hal-tinyusb.c * fix S3 flash image base (espressif#6208) * Added my new Unexpected Maker ESP32-S3 boards (espressif#6211) * Fixes UART_1 TX Pin setup When passing the PR to this branch, it seems that the change to this line was forgotten. * Initial SPI support and S3-Box variant * Bootloader is at 0x0000 for S3 (espressif#6215) * small adjustments for NVS and PSRAM init * WIP: Initial support for PSRAM (QSPI and OPI) * [FEATURE] Basic implementation of Arduino's I2S library (espressif#5304) Basic version of Arduino's I2S library. We currently support only 16bps + 16000 Hz sampling frequency. Other bitrates and sample rates will print warning and continue to operate, however the resulting audio quality may be poor. There will be further effort to fix these issues. * [I2S] Fix lib-builder error * Update idf_component.yml (espressif#6232) took me a while * Fixes RMT examples and adds ESP32-S3 config (espressif#6235) * WIP: Initial OPI support * Update Libs with the new lib-builder scripts * Update board menu for ESP32-S3 * fix ethernet clock runtime setting (espressif#6340) this was not possible anymore since the GPIO refactoring. This superseeds espressif/esp32-arduino-lib-builder#60 (which works only for clock on GPIO17). A PR will provided to revert this. @me-no-dev fyi The fix is done from @arendst Credits go to him! * Update IDF libs and fix missing BLE 4.2 features * Update CI scripts * script fixes * Add guard to USB examples * Disable some examples for ESP32-S3 * skip one more sketch and try again PIO * Fox SPI example and add proper esptool for PIO CI * Update ResetReason.ino * Update IDF, Add ESP-SR and RainMaker * Enable RainMaker on all chips * Enable hardware test on ESP32-S3 * Adjust build dir for tests and sketches * Update tests_build.sh * Send event also if tests fail * Add helper script for updating the core version * [Docs] Added/Updated Lib builder docs (espressif#6401) * [Docs] Added/Updated Lib builder docs * [Docs] Fixes according to the PR review * [Docs] Fixes according to the PR review * SD_MMC: add ESP32-S3 support * CmakeList + Rainmaker src files edit * remove Rainmaker * Tasmota change * Fix Unicore WDT on HTTP OTA update * Revert "ESP32-S3 SDMMC support" (#20) * Fix reboot into download from TinyUSB on ESP32-S3 Requires manual reboot back into the new firmware after flashing has finished * Fix psram crash pico d4 (#110) * Fix reboot into download from TinyUSB on ESP32-S3 (#111) Requires manual reboot back into the new firmware after flashing has finished Co-authored-by: me-no-dev <hristo@espressif.com> * Revert "Fix psram crash pico d4 (#110)" (#113) This reverts commit 56cf555. * Fix boot freeze when trying to init PSRAM on Pico D4 * revert tinyusb * hal/usb_serial_jtag_ll.h only C3, H2, S3 * Fix sd mmc * add wpa_supplicant as requirement * Update platform.txt * remove Rainmaker * Update boards.txt * Update HardwareSerial.h * Update USBCDC.cpp * Update esptool.py * Update platformio-build-esp32.py * Update platformio-build-esp32c3.py * Update platformio-build-esp32s2.py * Update platformio-build-esp32s3.py * fix merge errors * Reordering - HardwareSerial Constructor * Update platformio-build-esp32.py * Update platformio-build-esp32c3.py * Update platformio-build-esp32s2.py * Update platformio-build-esp32s3.py * Update pins_arduino.h * Update platformio-build-esp32.py * Update platformio-build-esp32c3.py * Update platformio-build-esp32s2.py * Update platformio-build-esp32s3.py Co-authored-by: me-no-dev <hristo@espressif.com> Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com> Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com> Co-authored-by: Tomáš Pilný <34927466+PilnyTomas@users.noreply.github.com> Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com> Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com> Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com> * revert espressif#6456 Co-authored-by: me-no-dev <hristo@espressif.com> Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com> Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com> Co-authored-by: Tomáš Pilný <34927466+PilnyTomas@users.noreply.github.com> Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com> Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com> Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Jason2866
added a commit
to Jason2866/arduino-esp32
that referenced
this pull request
Apr 19, 2022
* Tasmota changes (espressif#123) * Initial S3 Support Just so we can compile and test! Some things might/will not work. SPI and UART baud detect need to be looked at. * Add S3 Toolchain * Update Esptool and add some missing adjustments * Add Dual-Core Support * Fix bootloop issue and enable DSP optimization * Run Arduino on Core1 * Rework USB selection * Update HWCDC.cpp * Update USB.cpp * Update esp32-hal-tinyusb.c * fix S3 flash image base (espressif#6208) * Added my new Unexpected Maker ESP32-S3 boards (espressif#6211) * Fixes UART_1 TX Pin setup When passing the PR to this branch, it seems that the change to this line was forgotten. * Initial SPI support and S3-Box variant * Bootloader is at 0x0000 for S3 (espressif#6215) * small adjustments for NVS and PSRAM init * WIP: Initial support for PSRAM (QSPI and OPI) * [FEATURE] Basic implementation of Arduino's I2S library (espressif#5304) Basic version of Arduino's I2S library. We currently support only 16bps + 16000 Hz sampling frequency. Other bitrates and sample rates will print warning and continue to operate, however the resulting audio quality may be poor. There will be further effort to fix these issues. * [I2S] Fix lib-builder error * Update idf_component.yml (espressif#6232) took me a while * Fixes RMT examples and adds ESP32-S3 config (espressif#6235) * WIP: Initial OPI support * Update Libs with the new lib-builder scripts * Update board menu for ESP32-S3 * fix ethernet clock runtime setting (espressif#6340) this was not possible anymore since the GPIO refactoring. This superseeds espressif/esp32-arduino-lib-builder#60 (which works only for clock on GPIO17). A PR will provided to revert this. @me-no-dev fyi The fix is done from @arendst Credits go to him! * Update IDF libs and fix missing BLE 4.2 features * Update CI scripts * script fixes * Add guard to USB examples * Disable some examples for ESP32-S3 * skip one more sketch and try again PIO * Fox SPI example and add proper esptool for PIO CI * Update ResetReason.ino * Update IDF, Add ESP-SR and RainMaker * Enable RainMaker on all chips * Enable hardware test on ESP32-S3 * Adjust build dir for tests and sketches * Update tests_build.sh * Send event also if tests fail * Add helper script for updating the core version * [Docs] Added/Updated Lib builder docs (espressif#6401) * [Docs] Added/Updated Lib builder docs * [Docs] Fixes according to the PR review * [Docs] Fixes according to the PR review * SD_MMC: add ESP32-S3 support * CmakeList + Rainmaker src files edit * remove Rainmaker * Tasmota change * Fix Unicore WDT on HTTP OTA update * Revert "ESP32-S3 SDMMC support" (#20) * Fix reboot into download from TinyUSB on ESP32-S3 Requires manual reboot back into the new firmware after flashing has finished * Fix psram crash pico d4 (espressif#110) * Fix reboot into download from TinyUSB on ESP32-S3 (espressif#111) Requires manual reboot back into the new firmware after flashing has finished Co-authored-by: me-no-dev <hristo@espressif.com> * Revert "Fix psram crash pico d4 (espressif#110)" (espressif#113) This reverts commit 56cf555. * Fix boot freeze when trying to init PSRAM on Pico D4 * revert tinyusb * hal/usb_serial_jtag_ll.h only C3, H2, S3 * Fix sd mmc * add wpa_supplicant as requirement * Update platform.txt * remove Rainmaker * Update boards.txt * Update HardwareSerial.h * Update USBCDC.cpp * Update esptool.py * Update platformio-build-esp32.py * Update platformio-build-esp32c3.py * Update platformio-build-esp32s2.py * Update platformio-build-esp32s3.py * fix merge errors * Reordering - HardwareSerial Constructor * Update platformio-build-esp32.py * Update platformio-build-esp32c3.py * Update platformio-build-esp32s2.py * Update platformio-build-esp32s3.py * Update pins_arduino.h * Update platformio-build-esp32.py * Update platformio-build-esp32c3.py * Update platformio-build-esp32s2.py * Update platformio-build-esp32s3.py Co-authored-by: me-no-dev <hristo@espressif.com> Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com> Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com> Co-authored-by: Tomáš Pilný <34927466+PilnyTomas@users.noreply.github.com> Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com> Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com> Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com> * Bugfix fs read+speed improvements (espressif#127) * Revert "Edited VFSFileImpl::read to use both read/fread (espressif#6456)" This reverts commit 7b89b39. * Added default file buffer size + function to change it by user Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com> Co-authored-by: me-no-dev <hristo@espressif.com> Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com> Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com> Co-authored-by: Tomáš Pilný <34927466+PilnyTomas@users.noreply.github.com> Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com> Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com> Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Checklist
This entire section above can be deleted if all items are checked.
Summary
Please describe your proposed PR and what it contains.
Impact
Please describe impact of your PR and it's function.
Related links
Please provide links to related issue, PRs etc.