Can't compile for Nano

[nkieffer]

Unable to compile for Nano. The arduino:avr core is installed. I've been able to compile for other boards included in the arduino:avr core.

nkieffer@cmis-nkieffer ~/Arduino $ arduino-cli core list

ID         	Installed	Latest	Name

arduino:avr	1.6.21   	1.6.21	Arduino AVR Boards

nkieffer@cmis-nkieffer ~/Arduino $ arduino-cli compile --fqbn arduino:avr:nano Sweep/

avr-g++: error: missing device or architecture after '-mmcu='

Error: exit status 1

Compilation failed.
nkieffer@cmis-nkieffer ~/Arduino $ arduino-cli compile --fqbn arduino:avr:uno Sweep

Build options changed, rebuilding all

Alternatives for Servo.h: [Servo@1.1.2]

ResolveLibrary(Servo.h)

-> candidates: [Servo@1.1.2]

Sketch uses 2158 bytes (6%) of program storage space. Maximum is 32256 bytes.

Global variables use 52 bytes (2%) of dynamic memory, leaving 1996 bytes for local variables. Maximum is 2048 bytes.

[tab4moji]

for the new bootloader, the fqbn is "arduino:avr:nano:cpu=atmega328".
but I dont know the option for the old bootloader.

[nkieffer]

Using arduino:avr:nano:cpu=atmega328 as the fqbn worked for me.

[tab4moji]

for the old bootloader, the fqbn is "arduino:avr:nano:cpu=atmega328pld".

[cmaglie]

Duplicate of #23

[MichalSkoula]

for the old bootloader, the fqbn is "arduino:avr:nano:cpu=atmega328pld".

you mean old, not pld :)

[scottchiefbaker]

I came to create a new issue about the Nano with the "old" bootloader and found it here. Thank you!

The correct FQBN is: arduino:avr:nano:cpu=atmega328old

[klao]

for the old bootloader, the fqbn is "arduino:avr:nano:cpu=atmega328pld".

In case someone finds this (like I did). It's a typo, the correct fqbn is arduino:avr:nano:cpu=atmega328old.