diff --git a/README.md b/README.md
index 2da7fc7..5cb8f9c 100644
--- a/README.md
+++ b/README.md
@@ -26,6 +26,7 @@
- [Tools for Home Automation](#Tools-for-Home-Automation)
- [Getting Started with Home Assistant(HA)](#Home-Assistant)
- [Getting Started with Homebridge](#Homebridge)
+ - [Getting Started with ESPHome](#ESPHome)
- [Setting up Watchdog Time (WDT) on Raspberry Pi](https://github.com/mikeroyal/Raspberry-Pi-Guide#setting-watchdog-timer-wdt-on-raspberry-pi)
5. [Raspberry Pi Upgrades](https://github.com/mikeroyal/Raspberry-Pi-Guide#raspberry-pi-upgrades)
@@ -573,7 +574,105 @@ Home Assistant integrations. Credit: [Home Assistant](https://www.home-assistant
Homebridge UI
-
+
+
+## ESPHome
+
+[Back to the Top](#table-of-contents)
+
+
+ 
+
+
+
+[ESPHome](https://esphome.io/) is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
+
+#### Quick Links
+
+ - [ESP Web Tools](https://esphome.github.io/esp-web-tools/)
+
+ - [Installing ESPHome Manually | ESPHome](https://esphome.io/guides/installing_esphome.html)
+
+ - [Getting Started with the ESPHome Command Line](https://esphome.io/guides/getting_started_command_line.html)
+
+ - [Getting Started with ESPHome and Home Assistant](https://esphome.io/guides/getting_started_hassio.html)
+
+ - [ESPHome on the Raspberry Pi Pico! | Jeff Geerling](https://www.jeffgeerling.com/blog/2022/esphome-on-raspberry-pi-pico)
+
+ - [How to Start on Raspberry Pi Home Automation | ESPHome](https://www.instructables.com/How-to-Start-on-Raspberry-Pi-Home-Automation-ESPHo/)
+
+ - [ESPHome Setup | Integrating Home Assistant with Adafruit IO](https://learn.adafruit.com/integrating-adafruit-io-with-home-assistant/esphome-setup)
+
+### Install ESPHome using Home Assistant
+
+In [Home Assistant](https://www.home-assistant.io/integrations/esphome/) go to:
+
+ **Configuration > Add-ons, Backups & Supervisor > Add-on Store (button in the lower right corner) or click on the My Home Assistant Link below:**
+
+Open your Home Assistant instance and show the Supervisor add-on store.
+
+[](https://my.home-assistant.io/redirect/config_flow_start?domain=esphome)
+
+ - Next, search for ESPHome, click on the result and then click on the Install button.
+
+
+ 
+
+
+
+ - When the installation is finished, the Install button will be replaced with Start button – click on it to start the ESPHome add-on.
+
+
+ 
+
+
+
+ - Wait a few seconds for the ESPHome to start and then click on the Open Web UI button.
+
+
+ 
+
+
+
+### Install ESPHome using Docker
+
+ - First thing is to pull the [ESPHome Docker image from Docker Hub](https://hub.docker.com/u/esphome) (Online).
+
+ ```docker pull esphome/esphome```
+
+ - Then, start the ESPHome wizard. This wizard will ask you about your device type, your device name, your WiFi credentials and finally will generate a yaml file containing all of the configurations for you.
+
+ ```docker run --rm -v "${PWD}":/config -it esphome/esphome wizard stl.yaml```
+
+ - Now, connect your ESP device to the device where Docker is running (either using an USB cable or Serial-To-USB adapter) and if you are on Linux type the following command :
+
+ ```dmesg | grep ttyUSB```
+
+ - Put your device in programming mode (if needed) and execute the next command to install the ESPHome on the device connected to the /dev/ttyUSB1 using the configuration stored in stl.yaml file
+
+ ```docker run --rm -v "${PWD}":/config --device=/dev/ttyUSB1 -it esphome/esphome run stl.yaml```
+
+### Install ESPHome using Python
+
+ - If you are on macOS or Linux check if Python 3.8 or later is installed by executing the command.
+
+ ```python3 --version```
+
+ - If you are on macOS, you need to install wheel and esphome packages by using the following command.
+
+ ```pip3 install wheel esphome```
+
+ - If you are on Linux, you have to install esphome package by using the following command.
+
+ ```pip3 install --user esphome```
+
+ - If you are on macOS or Linux you can start the ESPHome wizard using the following command.
+
+ ```esphome wizard stl-python.yaml```
+
+ - Finally, connect your ESP device to your Computer (using USB cable or Serial-To-usb adapter) and put it in programming mode (if needed). Then, Install ESPHome using the configuration in the stl-python.yaml file.
+
+ ```esphome run stl-python.yaml```
## Setting Watchdog Timer (WDT) on Raspberry Pi
[Back to the Top](https://github.com/mikeroyal/raspberry-pi-Guide#table-of-contents)