Skip to content

Latest commit

 

History

History
 
 

WiFiClientConnect

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
README.md
README.md
 
 
WiFiClientConnect.ino
WiFiClientConnect.ino
 
 
ci.json
ci.json
 
 

README.md

NetworkClientConnect Example

This example demonstrates how to connect to the Wi-Fi and manage the status and disconnection from STA.

Supported Targets

Currently, this example supports the following targets.

Supported Targets ESP32 ESP32-S2 ESP32-C3

How to Use Example

Using Arduino IDE

  • Before Compile/Verify, select the correct board: Tools -> Board.
  • Select the COM port: Tools -> Port: xxx where the xxx is the detected COM port.

Using Platform IO

  • Select the COM port: Devices or set the upload_port`` option on the platformio.ini` file.

Example/Log Output

[WiFi] Connecting to MyWiFiNetwork
[    66][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 0 - WIFI_READY
[   150][V][WiFiGeneric.cpp:338] _arduino_event_cb(): STA Started
[   151][V][WiFiGeneric.cpp:97] set_esp_interface_ip(): Configuring Station static IP: 0.0.0.0, MASK: 0.0.0.0, GW: 0.0.0.0
[   151][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 2 - STA_START
[WiFi] WiFi is disconnected
[   234][V][WiFiGeneric.cpp:353] _arduino_event_cb(): STA Connected: SSID: MyWiFiNetwork, BSSID: xx:xx:xx:xx:xx:xx, Channel: 8, Auth: WPA2_PSK
[   235][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 4 - STA_CONNECTED
[   560][V][WiFiGeneric.cpp:367] _arduino_event_cb(): STA Got New IP:192.168.68.114
[   561][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 7 - STA_GOT_IP
[   564][D][WiFiGeneric.cpp:1004] _eventCallback(): STA IP: 192.168.68.114, MASK: 255.255.255.0, GW: 192.168.68.1
[WiFi] WiFi is connected!
[WiFi] IP address: 192.168.68.114
[WiFi] Disconnecting from WiFi!
[  2633][V][WiFiGeneric.cpp:360] _arduino_event_cb(): STA Disconnected: SSID: MyWiFiNetwork, BSSID: xx:xx:xx:xx:xx:xx, Reason: 8
[  2634][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 5 - STA_DISCONNECTED
[  2635][V][WiFiGeneric.cpp:341] _arduino_event_cb(): STA Stopped
[  2641][W][WiFiGeneric.cpp:953] _eventCallback(): Reason: 8 - ASSOC_LEAVE
[  2654][D][WiFiGeneric.cpp:975] _eventCallback(): WiFi the station is disconnected
[  2661][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 3 - STA_STOP
[WiFi] Disconnected from WiFi!
...

Troubleshooting

Important: Be sure you're using a good quality USB cable that has enough power for your project.

  • Programming Fail: If the programming/flash procedure fails, try to reduce the serial connection speed.
  • COM port not detected: Check the USB cable connection and the USB to Serial driver installation.

If the error persists, you can ask for help at the official ESP32 forum or see Contribute.

Contribute

To know how to contribute to this project, see How to contribute.

If you have any feedback or issue to report on this example/library, please open an issue or fix it by creating a new PR. Contributions are more than welcome!

Before creating a new issue, be sure to try Troubleshooting and check if the same issue was already created by someone else.

Resources