status_light -> status_pixel everywhere, to match now required keyword arg name

Author: dhalbert

Diff for: examples/esp32spi_aio_post.py

@@ -38,18 +38,18 @@
     spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
 esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
 """Use below for Most Boards"""
-status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
+status_pixel = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
 """Uncomment below for ItsyBitsy M4"""
-# status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
+# status_pixel = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
 """Uncomment below for an externally defined RGB LED (including Arduino Nano Connect)"""
 # import adafruit_rgbled
 # from adafruit_esp32spi import PWMOut
 # RED_LED = PWMOut.PWMOut(esp, 26)
 # GREEN_LED = PWMOut.PWMOut(esp, 27)
 # BLUE_LED = PWMOut.PWMOut(esp, 25)
-# status_light = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
+# status_pixel = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
 
-wifi = WiFiManager(esp, ssid, password, status_light=status_light)
+wifi = WiFiManager(esp, ssid, password, status_pixel=status_pixel)
 
 counter = 0
 

Diff for: examples/esp32spi_cheerlights.py

@@ -40,17 +40,17 @@
     spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
 esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
 """Use below for Most Boards"""
-status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
+status_pixel = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
 """Uncomment below for ItsyBitsy M4"""
-# status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
+# status_pixel = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
 """Uncomment below for an externally defined RGB LED (including Arduino Nano Connect)"""
 # import adafruit_rgbled
 # from adafruit_esp32spi import PWMOut
 # RED_LED = PWMOut.PWMOut(esp, 26)
 # GREEN_LED = PWMOut.PWMOut(esp, 27)
 # BLUE_LED = PWMOut.PWMOut(esp, 25)
-# status_light = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
-wifi = WiFiManager(esp, ssid, password, status_light=status_light)
+# status_pixel = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
+wifi = WiFiManager(esp, ssid, password, status_pixel=status_pixel)
 
 # neopixels
 pixels = neopixel.NeoPixel(board.A1, 16, brightness=0.3)

Diff for: examples/esp32spi_localtime.py

@@ -38,18 +38,18 @@
 esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
 
 """Use below for Most Boards"""
-status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
+status_pixel = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
 """Uncomment below for ItsyBitsy M4"""
-# status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
+# status_pixel = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
 """Uncomment below for an externally defined RGB LED (including Arduino Nano Connect)"""
 # import adafruit_rgbled
 # from adafruit_esp32spi import PWMOut
 # RED_LED = PWMOut.PWMOut(esp, 26)
 # GREEN_LED = PWMOut.PWMOut(esp, 27)
 # BLUE_LED = PWMOut.PWMOut(esp, 25)
-# status_light = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
+# status_pixel = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
 
-wifi = WiFiManager(esp, ssid, password, status_light=status_light)
+wifi = WiFiManager(esp, ssid, password, status_pixel=status_pixel)
 
 the_rtc = rtc.RTC()
 

Diff for: examples/esp32spi_wpa2ent_aio_post.py

@@ -44,24 +44,24 @@
 esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
 
 """Use below for Most Boards"""
-status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
+status_pixel = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
 """Uncomment below for ItsyBitsy M4"""
-# status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
+# status_pixel = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
 """Uncomment below for an externally defined RGB LED (including Arduino Nano Connect)"""
 # import adafruit_rgbled
 # from adafruit_esp32spi import PWMOut
 # RED_LED = PWMOut.PWMOut(esp, 26)
 # GREEN_LED = PWMOut.PWMOut(esp, 27)
 # BLUE_LED = PWMOut.PWMOut(esp, 25)
-# status_light = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
+# status_pixel = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
 
 wifi = WiFiManager(
     esp,
     ssid,
     password,
     enterprise_ident=enterprise_ident,
     enterprise_user=enterprise_user,
-    status_light=status_light,
+    status_pixel=status_pixel,
     connection_type=WiFiManager.ENTERPRISE,
 )