pins_arduino.h

#ifndef Pins_Arduino_h
#define Pins_Arduino_h

#include <stdint.h>

#define EXTERNAL_NUM_INTERRUPTS 16
#define NUM_DIGITAL_PINS        40
#define NUM_ANALOG_INPUTS       18

#define analogInputToDigitalPin(p)  (((p)<40)?(esp32_adc2gpio[(p)]):-1)
#define digitalPinToInterrupt(p)    (((p)<40)?(p):-1)
#define digitalPinHasPWM(p)         (p < 34)

// Sequans Monarch LTE Cat M1/NB1 modem
// NOTE: The Pycom pinout as well as spec sheet block diagram / pin details
// incorrectly list the LTE pins. The correct pins are defined in the source and CSV
// at https://github.com/pycom/pycom-micropython-sigfox/tree/master/esp32/boards/GPY.
#define LTE_CTS 18  // GPIO18 - Sequans modem CTS
#define LTE_RTS 19  // GPIO19 - Sequans modem RTS (pull low to communicate)
#define LTE_RX 23   // GPIO23 - Sequans modem RX
#define LTE_TX 5    // GPIO5  - Sequans modem TX
#define LTE_WAKE 27 // GPIO27 - Sequans modem wake-up interrupt
#define LTE_BAUD 921600

static const uint8_t LED_BUILTIN = 0; // ->2812 RGB !!!
#define BUILTIN_LED  LED_BUILTIN // backward compatibility

#define ANT_SELECT 21   // GPIO21 - WiFi external / internal antenna switch

static const uint8_t TX = 1;
static const uint8_t RX = 3;

static const uint8_t SDA = 12;
static const uint8_t SCL = 13;
 
static const uint8_t SS    = 17;
static const uint8_t MOSI  = 22;
static const uint8_t MISO  = 37;
static const uint8_t SCK   = 13;

static const uint8_t A0 = 36;
static const uint8_t A1 = 37;
static const uint8_t A2 = 38;
static const uint8_t A3 = 39;
static const uint8_t A4 = 32;
static const uint8_t A5 = 33;
static const uint8_t A6 = 34;
static const uint8_t A7 = 35;
static const uint8_t A10 = 4;
static const uint8_t A11 = 0;
static const uint8_t A12 = 2;
static const uint8_t A13 = 15;
static const uint8_t A14 = 13;
static const uint8_t A15 = 12;
static const uint8_t A16 = 14;
static const uint8_t A17 = 27;
static const uint8_t A18 = 25;
static const uint8_t A19 = 26;

static const uint8_t T0 = 4;
static const uint8_t T1 = 0;
static const uint8_t T2 = 2;
static const uint8_t T3 = 15;
static const uint8_t T4 = 13;
static const uint8_t T5 = 12;
static const uint8_t T6 = 14;
static const uint8_t T7 = 27;
static const uint8_t T8 = 33;
static const uint8_t T9 = 32;

static const uint8_t DAC1 = 25;
static const uint8_t DAC2 = 26;

#endif /* Pins_Arduino_h */