defconfig.esp32c6

CONFIG_BT_ENABLED=y
CONFIG_BT_BLE_BLUFI_ENABLE=y
CONFIG_RTC_CLK_CAL_CYCLES=576
# CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 is not set
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
# This Enables RISCV LP for C6 - but it can't be used within Arduino at this time. 
#CONFIG_ULP_COPROC_ENABLED=y
#CONFIG_ULP_COPROC_LP_CORE=y
#CONFIG_ULP_COPROC_RESERVE_MEM=4096

#
# OpenThread
#
CONFIG_OPENTHREAD_ENABLED=y
# Border Router disabled
# CONFIG_OPENTHREAD_BORDER_ROUTER=y
# CONFIG_OPENTHREAD_RADIO_SPINEL_UART=y

# DNS64 and NAT64 will be disabled for a while
# OT IDF issue https://github.com/espressif/esp-idf/issues/15069
# CONFIG_OPENTHREAD_DNS64_CLIENT=y

# Radio for RPC
# CONFIG_OPENTHREAD_RADIO=y 
# CONFIG_OPENTHREAD_RADIO_NATIVE=y
# CONFIG_OPENTHREAD_DIAG=n
CONFIG_OPENTHREAD_COMMISSIONER=y
CONFIG_OPENTHREAD_JOINER=y
CONFIG_OPENTHREAD_CLI=y
CONFIG_OPENTHREAD_SRP_CLIENT=y
CONFIG_OPENTHREAD_DNS_CLIENT=y
# Default dataset for quick start
CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
# end of OpenThread

# Matter shall use only WiFi
CONFIG_ENABLE_MATTER_OVER_THREAD=n

#
# Zigbee
#
CONFIG_ZB_ZED=y
CONFIG_ZB_RADIO_NATIVE=y
# end of Zigbee