From c8bcdc1e7b036e151eb3a2263d2d8cb20c41bd92 Mon Sep 17 00:00:00 2001
From: Tomas Pilny <tomas.pilny@espressif.com>
Date: Fri, 14 Jul 2023 13:18:54 +0200
Subject: [PATCH] Renamed portTICK_RATE_MS to portTICK_PERIOD_MS in 2 files

---
 cores/esp32/esp32-hal-i2c.c  | 8 ++++----
 cores/esp32/esp32-hal-uart.c | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/cores/esp32/esp32-hal-i2c.c b/cores/esp32/esp32-hal-i2c.c
index 84959dbc9a3..4fe09ff3759 100644
--- a/cores/esp32/esp32-hal-i2c.c
+++ b/cores/esp32/esp32-hal-i2c.c
@@ -184,7 +184,7 @@ esp_err_t i2cWrite(uint8_t i2c_num, uint16_t address, const uint8_t* buff, size_
     }
     
     //short implementation does not support zero size writes (example when scanning) PR in IDF?
-    //ret =  i2c_master_write_to_device((i2c_port_t)i2c_num, address, buff, size, timeOutMillis / portTICK_RATE_MS);
+    //ret =  i2c_master_write_to_device((i2c_port_t)i2c_num, address, buff, size, timeOutMillis / portTICK_PERIOD_MS);
 
     ret = ESP_OK;
     uint8_t cmd_buff[I2C_LINK_RECOMMENDED_SIZE(1)] = { 0 };
@@ -207,7 +207,7 @@ esp_err_t i2cWrite(uint8_t i2c_num, uint16_t address, const uint8_t* buff, size_
     if (ret != ESP_OK) {
         goto end;
     }
-    ret = i2c_master_cmd_begin((i2c_port_t)i2c_num, cmd, timeOutMillis / portTICK_RATE_MS);
+    ret = i2c_master_cmd_begin((i2c_port_t)i2c_num, cmd, timeOutMillis / portTICK_PERIOD_MS);
 
 end:
     if(cmd != NULL){
@@ -235,7 +235,7 @@ esp_err_t i2cRead(uint8_t i2c_num, uint16_t address, uint8_t* buff, size_t size,
     if(!bus[i2c_num].initialized){
         log_e("bus is not initialized");
     } else {
-        ret = i2c_master_read_from_device((i2c_port_t)i2c_num, address, buff, size, timeOutMillis / portTICK_RATE_MS);
+        ret = i2c_master_read_from_device((i2c_port_t)i2c_num, address, buff, size, timeOutMillis / portTICK_PERIOD_MS);
         if(ret == ESP_OK){
             *readCount = size;
         } else {
@@ -264,7 +264,7 @@ esp_err_t i2cWriteReadNonStop(uint8_t i2c_num, uint16_t address, const uint8_t*
     if(!bus[i2c_num].initialized){
         log_e("bus is not initialized");
     } else {
-        ret = i2c_master_write_read_device((i2c_port_t)i2c_num, address, wbuff, wsize, rbuff, rsize, timeOutMillis / portTICK_RATE_MS);
+        ret = i2c_master_write_read_device((i2c_port_t)i2c_num, address, wbuff, wsize, rbuff, rsize, timeOutMillis / portTICK_PERIOD_MS);
         if(ret == ESP_OK){
             *readCount = rsize;
         } else {
diff --git a/cores/esp32/esp32-hal-uart.c b/cores/esp32/esp32-hal-uart.c
index 2c0cef66a7b..fee78390f98 100644
--- a/cores/esp32/esp32-hal-uart.c
+++ b/cores/esp32/esp32-hal-uart.c
@@ -459,7 +459,7 @@ uint8_t uartRead(uart_t* uart)
       c = uart->peek_byte;
     } else {
 
-        int len = uart_read_bytes(uart->num, &c, 1, 20 / portTICK_RATE_MS);
+        int len = uart_read_bytes(uart->num, &c, 1, 20 / portTICK_PERIOD_MS);
         if (len <= 0) { // includes negative return from IDF in case of error
             c  = 0;
         }
@@ -481,7 +481,7 @@ uint8_t uartPeek(uart_t* uart)
     if (uart->has_peek) {
       c = uart->peek_byte;
     } else {
-        int len = uart_read_bytes(uart->num, &c, 1, 20 / portTICK_RATE_MS);
+        int len = uart_read_bytes(uart->num, &c, 1, 20 / portTICK_PERIOD_MS);
         if (len <= 0) { // includes negative return from IDF in case of error
             c  = 0;
         } else {