pins_arduino.h

#ifndef Pins_Arduino_h
#define Pins_Arduino_h

#include <stdint.h>

static const uint8_t TX = 1;
static const uint8_t RX = 3;

static const uint8_t SDA = 21;
static const uint8_t SCL = 22;

static const uint8_t SS = 5;
static const uint8_t MOSI = 23;
static const uint8_t MISO = 19;
static const uint8_t SCK = 18;

static const uint8_t A0 = 36;
static const uint8_t A3 = 39;
static const uint8_t A4 = 32;
static const uint8_t A5 = 33;
static const uint8_t A6 = 34;
static const uint8_t A7 = 35;
static const uint8_t A10 = 4;
static const uint8_t A11 = 0;
static const uint8_t A12 = 2;
static const uint8_t A13 = 15;
static const uint8_t A14 = 13;
static const uint8_t A15 = 12;
static const uint8_t A16 = 14;
static const uint8_t A17 = 27;
static const uint8_t A18 = 25;
static const uint8_t A19 = 26;

static const uint8_t T0 = 4;
static const uint8_t T1 = 0;
static const uint8_t T2 = 2;
static const uint8_t T3 = 15;
static const uint8_t T4 = 13;
static const uint8_t T5 = 12;
static const uint8_t T6 = 14;
static const uint8_t T7 = 27;
static const uint8_t T8 = 33;
static const uint8_t T9 = 32;

static const uint8_t DAC1 = 25;
static const uint8_t DAC2 = 26;

// Specific CH2i (Charles Hallard) Boards
// 1st Revision Denky with ESP WROOM32 + LoRa RN2483 module
#if defined(ARDUINO_DENKY_WROOM32)
#define PUSH_BUTTON    0
#define TIC_ENABLE_PIN 4
#define TIC_RX_PIN     33
#define LORA_TX_PIN    26
#define LORA_RX_PIN    27
#define LORA_RESET     14
#define RGB_LED_PIN    25

// 2nd Utra Small version with ESP Pico-D4-V3-02
#elif defined(ARDUINO_DENKY_PICOV3)
// RGB Led Pins
#define LED_RED_PIN 27
#define LED_GRN_PIN 26
#define LED_BLU_PIN 25

// Teleinfo RXD pin is connected to ESP32-PICO-V3-02 GPIO8
#define TIC_RX_PIN  8
#endif

#endif /* Pins_Arduino_h */