Skip to content

Latest commit

 

History

History
14 lines (12 loc) · 831 Bytes

README.md

File metadata and controls

14 lines (12 loc) · 831 Bytes

ESP RainMaker Examples

While building any examples for ESP RainMaker, take care of the following:

  1. Change the partition scheme that fits your flash size in Arduino IDE to RainMaker 4MB, RainMaker 4MB no OTA or RainMaker 8MB (Tools -> Partition Scheme -> RainMaker).
  2. Once ESP RainMaker gets started, compulsorily call WiFi.beginProvision() which is responsible for user-node mapping.
  3. Use the appropriate provisioning scheme as per the board.
    • ESP32 Board: BLE Provisioning
    • ESP32-C3 Board: BLE Provisioning
    • ESP32-S3 Board: BLE Provisioning
    • ESP32-S2 Board: SoftAP Provisioning
    • ESP32-C6 Board: BLE Provisioning
    • ESP32-H2 Board: BLE Provisioning
  4. Set debug level to Info (Tools -> Core Debug Level -> Info). This is the recommended debug level but not mandatory to run RainMaker.