pins_arduino.h

#ifndef Pins_Arduino_h
#define Pins_Arduino_h

#include <stdint.h>

// I2C OLED Display works with SSD1306 driver
#define OLED_SDA 4
#define OLED_SCL 15
#define OLED_RST 16

// SPI LoRa Radio
#define LORA_SCK 5        // GPIO5 - SX1276 SCK
#define LORA_MISO 19     // GPIO19 - SX1276 MISO
#define LORA_MOSI 27    // GPIO27 - SX1276 MOSI
#define LORA_CS 18     // GPIO18 - SX1276 CS
#define LORA_RST 14   // GPIO14 - SX1276 RST
#define LORA_IRQ 26  // GPIO26 - SX1276 IRQ (interrupt request)

static const uint8_t LED_BUILTIN = 2;
#define BUILTIN_LED  LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN  // allow testing #ifdef LED_BUILTIN

static const uint8_t KEY_BUILTIN = 0;

static const uint8_t TX = 1;
static const uint8_t RX = 3;

static const uint8_t SDA = 21;
static const uint8_t SCL = 22;

static const uint8_t SS    = 18;
static const uint8_t MOSI  = 27;
static const uint8_t MISO  = 19;
static const uint8_t SCK   = 5;

static const uint8_t A0 = 36;
static const uint8_t A1 = 37;
static const uint8_t A2 = 38;
static const uint8_t A3 = 39;
static const uint8_t A4 = 32;
static const uint8_t A5 = 33;
static const uint8_t A6 = 34;
static const uint8_t A7 = 35;

static const uint8_t A10 = 4;
static const uint8_t A11 = 0;
static const uint8_t A12 = 2;
static const uint8_t A13 = 15;
static const uint8_t A14 = 13;
static const uint8_t A15 = 12;
static const uint8_t A16 = 14;
static const uint8_t A17 = 27;
static const uint8_t A18 = 25;
static const uint8_t A19 = 26;

static const uint8_t T0 = 4;
static const uint8_t T1 = 0;
static const uint8_t T2 = 2;
static const uint8_t T3 = 15;
static const uint8_t T4 = 13;
static const uint8_t T5 = 12;
static const uint8_t T6 = 14;
static const uint8_t T7 = 27;
static const uint8_t T8 = 33;
static const uint8_t T9 = 32;

static const uint8_t DAC1 = 25;
static const uint8_t DAC2 = 26;

#endif /* Pins_Arduino_h */