concurrent_innodb_safelog.result

SET GLOBAL TRANSACTION ISOLATION LEVEL REPEATABLE READ;
SELECT @@global.tx_isolation;
@@global.tx_isolation
REPEATABLE-READ
Warnings:
Warning	1287	'@@tx_isolation' is deprecated and will be removed in a future release. Please use '@@transaction_isolation' instead
SELECT @@global.innodb_locks_unsafe_for_binlog;
@@global.innodb_locks_unsafe_for_binlog
0
# keep_locks == 1
CREATE USER mysqltest@localhost;
drop table if exists t1;

**
** two UPDATE's running and both changing distinct result sets
**
** connection thread1
** Set up table
SET SESSION DEFAULT_STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** Get user level lock (ULL) for thread 1
select get_lock("hello",10);
get_lock("hello",10)
1
** connection thread2
** Start transaction for thread 2
begin;
** Update will cause a table scan and a new ULL  will
** be created and blocked on the first row where tipo=11.
update t1 set eta=1+get_lock("hello",10)*0 where tipo=11;
** connection thread1
** Start new transaction for thread 1
begin;
** Update on t1 will cause a table scan which will be blocked because
** the previously initiated table scan applied exclusive key locks on 
** all primary keys.
** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
** do not match the WHERE condition are released.
update t1 set eta=2 where tipo=22;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** Release user level name lock from thread 1. This will cause the ULL
** on thread 2 to end its wait.
DO release_lock("hello");
** Table is now updated with a new eta on tipo=22 for thread 1.
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** Release the lock and collect result from update on thread 2
DO release_lock("hello");
** Table should have eta updates where tipo=11 but updates made by
** thread 1 shouldn't be visible yet.
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** Sending commit on thread 2.
commit;
** connection thread1
** Make sure table reads didn't change yet on thread 1.
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** And send final commit on thread 1.
commit;
** Table should now be updated by both updates in the order of
** thread 1,2.
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** Make sure the output is similar for t1.
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;

**
** two UPDATE's running and one changing result set
**
** connection thread1
** Set up table
SET SESSION DEFAULT_STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** Get ULL "hello" on thread 1
select get_lock("hello",10);
get_lock("hello",10)
1
** connection thread2
** Start transaction on thread 2
begin;
** Update will cause a table scan.
** This will cause a hang on the first row where tipo=1 until the
** blocking ULL is released.
update t1 set eta=1+get_lock("hello",10)*0 where tipo=1;
** connection thread1
** Start transaction on thread 1
begin;
** Update on t1 will cause a table scan which will be blocked because
** the previously initiated table scan applied exclusive key locks on 
** all primary keys.
** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
** do not match the WHERE condition are released.
update t1 set tipo=1 where tipo=2;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** Release ULL. This will release the next waiting ULL on thread 2.
DO release_lock("hello");
** The table should still be updated with updates for thread 1 only:
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** Release the lock and collect result from thread 2:
DO release_lock("hello");
** Seen from thread 2 the table should have been updated on four
** places.
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
1	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
1	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
1	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
1	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
** connection thread1
** Thread 2 has committed but the result should remain the same for
** thread 1 (updated on three places):
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
** After a commit the table should be merged with the previous 
** commit.
** This select should show both updates:
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
1	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
1	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
1	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
1	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
1	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
1	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
1	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
1	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
1	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
1	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
1	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
1	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;

**
** One UPDATE and one INSERT .... Monty's test
**
** connection thread1
** Set up table
SET SESSION DEFAULT_STORAGE_ENGINE = InnoDB;
create table t1 (a int not null, b int not null);
insert into t1 values (1,1),(2,1),(3,1),(4,1);
** Create ULL 'hello2'
select get_lock("hello2",10);
get_lock("hello2",10)
1
** connection thread2
** Begin a new transaction on thread 2
begin;
** Update will create a table scan which creates a ULL where a=2;
** this will hang waiting on thread 1.
update t1 set b=10+get_lock(concat("hello",a),10)*0 where a=2;
** connection thread1
** Insert new values to t1 from thread 1; this created an implicit
** commit since there are no on-going transactions.
insert into t1 values (1,1);
** Release the ULL (thread 2 updates will finish).
DO release_lock("hello2");
** ..but thread 1 will still see t1 as if nothing has happend:
select * from t1;
a	b
1	1
2	1
3	1
4	1
1	1
** connection thread2
** Collect results from thread 2 and release the lock.
DO release_lock("hello2");
** The table should look like the original+updates for thread 2,
** and consist of new rows:
select * from t1;
a	b
1	1
2	10
3	1
4	1
1	1
** Commit changes from thread 2
commit;
** connection default
drop table t1;

**
** one UPDATE changing result set and SELECT ... FOR UPDATE
**
** connection thread1
** Set up table
SET SESSION DEFAULT_STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** connection thread2
** Begin a new transaction on thread 2
begin;
** Select a range for update.
select * from t1 where tipo=2 FOR UPDATE;
eta	tipo	c
20	2	ddddddddddddddddddddddddddddddddddddddddddd
40	2	fffffffffffffffffffffffffffffffffffffffffff
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
** connection thread1
** Begin a new transaction on thread 1 
begin;
** Update the same range which is marked for update on thread 2; this
** will hang because of row locks.
update t1 set tipo=1 where tipo=2;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** After the update the table will be unmodified because the previous
** transaction failed and was rolled back.
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** The table should look unmodified from thread 2.
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** Sending a commit should release the row locks and enable
** thread 1 to complete the transaction.
commit;
** connection thread1
** Commit on thread 1.
commit;
** connection thread2
** The table should not have been changed.
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
** Even on thread 1:
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;

**
** one UPDATE not changing result set and SELECT ... FOR UPDATE
**
** connection thread1
** Set up table
SET SESSION DEFAULT_STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** connection thread2
** Starting new transaction on thread 2.
begin;
** Starting SELECT .. FOR UPDATE
select * from t1 where tipo=2 FOR UPDATE;
eta	tipo	c
20	2	ddddddddddddddddddddddddddddddddddddddddddd
40	2	fffffffffffffffffffffffffffffffffffffffffff
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
** connection thread1

** Starting new transaction on thread 1
begin;
** Updating single row using a table scan. This will time out
** because of ongoing transaction on thread 1 holding lock on
** all primary keys in the scan.
** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
** do not match the WHERE condition are released.
update t1 set tipo=11 where tipo=22;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** After the time out the transaction is aborted; no rows should
** have changed.
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** The same thing should hold true for the transaction on
** thread 2
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
** connection thread1
commit;
** connection thread2
** Even after committing:
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;

**
** two SELECT ... FOR UPDATE
**
** connection thread1
** Set up table
SET SESSION DEFAULT_STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** connection thread2
** Begin a new transaction on thread 2
begin;
select * from t1 where tipo=2 FOR UPDATE;
eta	tipo	c
20	2	ddddddddddddddddddddddddddddddddddddddddddd
40	2	fffffffffffffffffffffffffffffffffffffffffff
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
** connection thread1
** Begin a new transaction on thread 1
begin;
** Selecting a range for update by table scan will be blocked
** because of on-going transaction on thread 2.
select * from t1 where tipo=1 FOR UPDATE;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** connection thread2
** Table will be unchanged and the select command will not be
** blocked:
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** Commit transacton on thread 2.
commit;
** connection thread1
** Commit transaction on thread 1.
commit;
** connection thread2
** Make sure table isn't blocked on thread 2:
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
** Make sure table isn't blocked on thread 1:
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;

**
** one UPDATE changing result set and DELETE
**
** connection thread1
** Set up table
SET SESSION DEFAULT_STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** connection thread2
begin;
delete from t1 where tipo=2;
** connection thread1
begin;
update t1 set tipo=1 where tipo=2;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50	1	ggggggggggggggggggggggggggggggggggggggggggg
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
** connection thread1
commit;
** connection thread2
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50	1	ggggggggggggggggggggggggggggggggggggggggggg
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50	1	ggggggggggggggggggggggggggggggggggggggggggg
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;

**
** one UPDATE not changing result set and DELETE
**
** connection thread1
** Set up table
SET SESSION DEFAULT_STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** connection thread2
begin;
delete from t1 where tipo=2;
** connection thread1
begin;
** Update on t1 will cause a table scan which will be blocked because
** the previously initiated table scan applied exclusive key locks on 
** all primary keys.
** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
** do not match the WHERE condition are released.
update t1 set tipo=1 where tipo=22;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
20	2	ddddddddddddddddddddddddddddddddddddddddddd
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40	2	fffffffffffffffffffffffffffffffffffffffffff
50	1	ggggggggggggggggggggggggggggggggggggggggggg
60	2	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50	1	ggggggggggggggggggggggggggggggggggggggggggg
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
** connection thread1
commit;
** connection thread2
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50	1	ggggggggggggggggggggggggggggggggggggggggggg
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1;
eta	tipo	c
7	7	aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8	8	bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10	1	ccccccccccccccccccccccccccccccccccccccccccc
30	1	eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50	1	ggggggggggggggggggggggggggggggggggggggggggg
70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** Cleanup
** connection thread2
** connection default
drop table t1;
drop user mysqltest@localhost;