ESP32-Eduroam

• Eduroam Wi-Fi connection with university login identity
• Working under Eduroam networks worldwide
• Methods: PEAP + MsCHAPv2

Format

• IDENTITY = youridentity --> if connecting from different university, use youridentity@youruniversity.domain format
• PASSWORD = yourpassword

Usage

• Change IDENTITY
• Change password
• Upload sketch and enjoy!
• After successful assign of IP address, board will connect to HTTP page on internet to verify your authentication
• Board will auto reconnect to Eduroam if it lost connection

Tested locations

University	Board	Method	Result
Technical University in Košice (Slovakia)	ESP32 Devkit v1	PEAP + MsCHAPv2	Working
Technical University in Košice (Slovakia)	ESP32 Devmodule v4	PEAP + MsCHAPv2	Working on 6th attempt in loop
Slovak Technical University in Bratislava (Slovakia)	ESP32 Devkit v1	PEAP + MsCHAPv2	Working
University of Antwerp (Belgium)	Lolin32	PEAP + MsCHAPv2	Working
UPV Universitat Politècnica de València (Spain)	ESP32 Devmodule v4	PEAP + MsCHAPv2	Working
Local Zeroshell powered network	ESP32 Devkit v1	PEAP + MsCHAPv2	Not working
Hasselt University (Belgium)	xxx	PEAP + MsCHAPv2	Working with fix sketch
Universidad de Granada (Spain)	Lolin D32 Pro	PEAP + MsCHAPv2	Working
Universidad de Granada (Spain)	Lolin D32	PEAP + MsCHAPv2	Working
Universidade Federal de Santa Catarina (Brazil)	xxx	EAP-TTLS + MsCHAPv2	Working
University of Central Florida (Orlando, Florida)	ESP32 Built-in OLED – Heltec WiFi Kit 32	PEAP + MsCHAPv2	Working
Université de Montpellier (France)	NodeMCU-32S	PEAP + MsCHAPv2	Working

Common errors - Switch to Debug mode for Serial monitor prints

Error	Appearance	Solution
Wi-Fi: Set status to INIT	Frequent	Hold EN button for few seconds
HANDSHAKE_TIMEOUT	Rare	Bug was found under Zeroshell RADIUS authentization - Unsuccessful connection
AUTH_EXPIRE	Common	In the case of weak Wi-Fi network signal, this error is quite common, bring your device closer to AP
ASSOC_EXPIRE	Rare	-

Successful connection example

Unsuccessful connection example