esp_intr_alloc.h

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at

//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#ifndef __ESP_INTR_ALLOC_H__
#define __ESP_INTR_ALLOC_H__

#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"

#ifdef __cplusplus
extern "C" {
#endif


/** @addtogroup Intr_Alloc
  * @{
  */


/** @brief Interrupt allocation flags
 *
 * These flags can be used to specify which interrupt qualities the
 * code calling esp_intr_alloc* needs.
 *
 */

//Keep the LEVELx values as they are here; they match up with (1<<level)
#define ESP_INTR_FLAG_LEVEL1		(1<<1)	///< Accept a Level 1 interrupt vector
#define ESP_INTR_FLAG_LEVEL2		(1<<2)	///< Accept a Level 2 interrupt vector
#define ESP_INTR_FLAG_LEVEL3		(1<<3)	///< Accept a Level 3 interrupt vector
#define ESP_INTR_FLAG_LEVEL4		(1<<4)	///< Accept a Level 4 interrupt vector
#define ESP_INTR_FLAG_LEVEL5		(1<<5)	///< Accept a Level 5 interrupt vector
#define ESP_INTR_FLAG_LEVEL6		(1<<6)	///< Accept a Level 6 interrupt vector
#define ESP_INTR_FLAG_NMI			(1<<7)	///< Accept a Level 7 interrupt vector
#define ESP_INTR_FLAG_SHARED		(1<<8)	///< Interrupt can be shared between ISRs
#define ESP_INTR_FLAG_EDGE			(1<<9)	///< Edge-triggered interrupt
#define ESP_INTR_FLAG_IRAM			(1<<10)	///< ISR can be called if cache is disabled
#define ESP_INTR_FLAG_INTRDISABLED	(1<<11)	///< Return with this interrupt disabled

#define ESP_INTR_FLAG_LOWMED	(ESP_INTR_FLAG_LEVEL1|ESP_INTR_FLAG_LEVEL2|ESP_INTR_FLAG_LEVEL3) ///< Low and medium prio interrupts. These can be handled in C.
#define ESP_INTR_FLAG_HIGH		(ESP_INTR_FLAG_LEVEL4|ESP_INTR_FLAG_LEVEL5|ESP_INTR_FLAG_LEVEL6|ESP_INTR_FLAG_NMI) ///< High level interrupts. Need to be handled in assembly.

#define ESP_INTR_FLAG_LEVELMASK	(ESP_INTR_FLAG_LEVEL1|ESP_INTR_FLAG_LEVEL2|ESP_INTR_FLAG_LEVEL3| \
								 ESP_INTR_FLAG_LEVEL4|ESP_INTR_FLAG_LEVEL5|ESP_INTR_FLAG_LEVEL6| \
								 ESP_INTR_FLAG_NMI) ///< Mask for all level flags
/**@}*/


/** @addtogroup Intr_Alloc_Pseudo_Src
  * @{
  */

/**
 * The esp_intr_alloc* functions can allocate an int for all ETS_*_INTR_SOURCE interrupt sources that
 * are routed through the interrupt mux. Apart from these sources, each core also has some internal
 * sources that do not pass through the interrupt mux. To allocate an interrupt for these sources,
 * pass these pseudo-sources to the functions.
 */
#define ETS_INTERNAL_TIMER0_INTR_SOURCE		-1 ///< Xtensa timer 0 interrupt source
#define ETS_INTERNAL_TIMER1_INTR_SOURCE		-2 ///< Xtensa timer 1 interrupt source
#define ETS_INTERNAL_TIMER2_INTR_SOURCE		-3 ///< Xtensa timer 2 interrupt source
#define ETS_INTERNAL_SW0_INTR_SOURCE		-4 ///< Software int source 1
#define ETS_INTERNAL_SW1_INTR_SOURCE		-5 ///< Software int source 2
#define ETS_INTERNAL_PROFILING_INTR_SOURCE	-6 ///< Int source for profiling

/**@}*/

typedef void (*intr_handler_t)(void *arg); 


typedef struct intr_handle_data_t intr_handle_data_t;
typedef intr_handle_data_t* intr_handle_t ;

/**
 * @brief Mark an interrupt as a shared interrupt
 * 
 * This will mark a certain interrupt on the specified CPU as
 * an interrupt that can be used to hook shared interrupt handlers
 * to.
 *
 * @param intno The number of the interrupt (0-31)
 * @param cpu CPU on which the interrupt should be marked as shared (0 or 1)
 * @param is_in_iram Shared interrupt is for handlers that reside in IRAM and
 *                   the int can be left enabled while the flash cache is disabled.
 *
 * @return ESP_ERR_INVALID_ARG if cpu or intno is invalid
 *         ESP_OK otherwise
 */
esp_err_t esp_intr_mark_shared(int intno, int cpu, bool is_in_iram);

/**
 * @brief Reserve an interrupt to be used outside of this framewoek
 * 
 * This will mark a certain interrupt on the specified CPU as
 * reserved, not to be allocated for any reason.
 *
 * @param intno The number of the interrupt (0-31)
 * @param cpu CPU on which the interrupt should be marked as shared (0 or 1)
 *
 * @return ESP_ERR_INVALID_ARG if cpu or intno is invalid
 *         ESP_OK otherwise
 */
esp_err_t esp_intr_reserve(int intno, int cpu);

/**
 * @brief Allocate an interrupt with the given parameters.
 *
 * This finds an interrupt that matches the restrictions as given in the flags
 * parameter, maps the given interrupt source to it and hooks up the given
 * interrupt handler (with optional argument) as well. If needed, it can return
 * a handle for the interrupt as well.
 *
 * The interrupt will always be allocated on the core that runs this function.
 *
 * If ESP_INTR_FLAG_IRAM flag is used, and handler address is not in IRAM or
 * RTC_FAST_MEM, then ESP_ERR_INVALID_ARG is returned.
 *
 * @param source The interrupt source. One of the ETS_*_INTR_SOURCE interrupt mux
 *               sources, as defined in soc/soc.h, or one of the internal
 *               ETS_INTERNAL_*_INTR_SOURCE sources as defined in this header.
 * @param flags An ORred mask of the ESP_INTR_FLAG_* defines. These restrict the
 *               choice of interrupts that this routine can choose from. If this value
 *               is 0, it will default to allocating a non-shared interrupt of level
 *               1, 2 or 3. If this is ESP_INTR_FLAG_SHARED, it will allocate a shared
 *               interrupt of level 1. Setting ESP_INTR_FLAG_INTRDISABLED will return 
 *               from this function with the interrupt disabled.
 * @param handler The interrupt handler. Must be NULL when an interrupt of level >3
 *               is requested, because these types of interrupts aren't C-callable.
 * @param arg    Optional argument for passed to the interrupt handler
 * @param ret_handle Pointer to an intr_handle_t to store a handle that can later be
 *               used to request details or free the interrupt. Can be NULL if no handle
 *               is required.
 *
 * @return ESP_ERR_INVALID_ARG if the combination of arguments is invalid.
 *         ESP_ERR_NOT_FOUND No free interrupt found with the specified flags
 *         ESP_OK otherwise
 */
esp_err_t esp_intr_alloc(int source, int flags, intr_handler_t handler, void *arg, intr_handle_t *ret_handle);


/**
 * @brief Allocate an interrupt with the given parameters.
 *
 *
 * This essentially does the same as esp_intr_alloc, but allows specifying a register and mask
 * combo. For shared interrupts, the handler is only called if a read from the specified 
 * register, ANDed with the mask, returns non-zero. By passing an interrupt status register
 * address and a fitting mask, this can be used to accelerate interrupt handling in the case
 * a shared interrupt is triggered; by checking the interrupt statuses first, the code can
 * decide which ISRs can be skipped
 *
 * @param source The interrupt source. One of the ETS_*_INTR_SOURCE interrupt mux
 *               sources, as defined in soc/soc.h, or one of the internal
 *               ETS_INTERNAL_*_INTR_SOURCE sources as defined in this header.
 * @param flags An ORred mask of the ESP_INTR_FLAG_* defines. These restrict the
 *               choice of interrupts that this routine can choose from. If this value
 *               is 0, it will default to allocating a non-shared interrupt of level
 *               1, 2 or 3. If this is ESP_INTR_FLAG_SHARED, it will allocate a shared
 *               interrupt of level 1. Setting ESP_INTR_FLAG_INTRDISABLED will return 
 *               from this function with the interrupt disabled.
 * @param intrstatusreg The address of an interrupt status register
 * @param intrstatusmask A mask. If a read of address intrstatusreg has any of the bits
 *               that are 1 in the mask set, the ISR will be called. If not, it will be
 *               skipped.
 * @param handler The interrupt handler. Must be NULL when an interrupt of level >3
 *               is requested, because these types of interrupts aren't C-callable.
 * @param arg    Optional argument for passed to the interrupt handler
 * @param ret_handle Pointer to an intr_handle_t to store a handle that can later be
 *               used to request details or free the interrupt. Can be NULL if no handle
 *               is required.
 *
 * @return ESP_ERR_INVALID_ARG if the combination of arguments is invalid.
 *         ESP_ERR_NOT_FOUND No free interrupt found with the specified flags
 *         ESP_OK otherwise
 */
esp_err_t esp_intr_alloc_intrstatus(int source, int flags, uint32_t intrstatusreg, uint32_t intrstatusmask, intr_handler_t handler, void *arg, intr_handle_t *ret_handle);


/**
 * @brief Disable and free an interrupt.
 *
 * Use an interrupt handle to disable the interrupt and release the resources
 * associated with it.
 *
 * @param handle The handle, as obtained by esp_intr_alloc or esp_intr_alloc_intrstatus
 *
 * @return ESP_ERR_INVALID_ARG if handle is invalid, or esp_intr_free runs on another core than
 *                             where the interrupt is allocated on.
 *         ESP_OK otherwise
 */
esp_err_t esp_intr_free(intr_handle_t handle);


/**
 * @brief Get CPU number an interrupt is tied to
 * 
 * @param handle The handle, as obtained by esp_intr_alloc or esp_intr_alloc_intrstatus
 *
 * @return The core number where the interrupt is allocated
 */
int esp_intr_get_cpu(intr_handle_t handle);

/**
 * @brief Get the allocated interrupt for a certain handle
 * 
 * @param handle The handle, as obtained by esp_intr_alloc or esp_intr_alloc_intrstatus
 *
 * @return The interrupt number
 */
int esp_intr_get_intno(intr_handle_t handle);


/**
 * @brief Disable the interrupt associated with the handle
 * 
 * @note For local interrupts (ESP_INTERNAL_* sources), this function has to be called on the
 *       CPU the interrupt is allocated on. Other interrupts have no such restriction.
 *
 * @param handle The handle, as obtained by esp_intr_alloc or esp_intr_alloc_intrstatus
 *
 * @return ESP_ERR_INVALID_ARG if the combination of arguments is invalid.
 *         ESP_OK otherwise
 */
esp_err_t esp_intr_disable(intr_handle_t handle);

/**
 * @brief Ensable the interrupt associated with the handle
 * 
 * @note For local interrupts (ESP_INTERNAL_* sources), this function has to be called on the
 *       CPU the interrupt is allocated on. Other interrupts have no such restriction.
 *
 * @param handle The handle, as obtained by esp_intr_alloc or esp_intr_alloc_intrstatus
 *
 * @return ESP_ERR_INVALID_ARG if the combination of arguments is invalid.
 *         ESP_OK otherwise
 */
esp_err_t esp_intr_enable(intr_handle_t handle);


/**
 * @brief Disable interrupts that aren't specifically marked as running from IRAM
 */
void esp_intr_noniram_disable();


/**
 * @brief Re-enable interrupts disabled by esp_intr_noniram_disable
 */
void esp_intr_noniram_enable();

/**@}*/


#ifdef __cplusplus
}
#endif

#endif