Merge branch 'master' into patch-1

Author: aentinger

cores/arduino/Arduino.h

@@ -112,7 +112,7 @@ void yield(void);
 #define bitSet(value, bit) ((value) |= (1UL << (bit)))
 #define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
 #define bitToggle(value, bit) ((value) ^= (1UL << (bit)))
-#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
+#define bitWrite(value, bit, bitvalue) ((bitvalue) ? bitSet(value, bit) : bitClear(value, bit))
 
 // avr-libc defines _NOP() since 1.6.2
 #ifndef _NOP
@@ -131,25 +131,25 @@ void initVariant(void);
 
 int atexit(void (*func)()) __attribute__((weak));
 
-void pinMode(uint8_t, uint8_t);
-void digitalWrite(uint8_t, uint8_t);
-int digitalRead(uint8_t);
-int analogRead(uint8_t);
+void pinMode(uint8_t pin, uint8_t mode);
+void digitalWrite(uint8_t pin, uint8_t val);
+int digitalRead(uint8_t pin);
+int analogRead(uint8_t pin);
 void analogReference(uint8_t mode);
-void analogWrite(uint8_t, int);
+void analogWrite(uint8_t pin, int val);
 
 unsigned long millis(void);
 unsigned long micros(void);
-void delay(unsigned long);
+void delay(unsigned long ms);
 void delayMicroseconds(unsigned int us);
 unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout);
 unsigned long pulseInLong(uint8_t pin, uint8_t state, unsigned long timeout);
 
 void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
 uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder);
 
-void attachInterrupt(uint8_t, void (*)(void), int mode);
-void detachInterrupt(uint8_t);
+void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode);
+void detachInterrupt(uint8_t interruptNum);
 
 void setup(void);
 void loop(void);

cores/arduino/Stream.cpp

@@ -218,7 +218,6 @@ size_t Stream::readBytes(char *buffer, size_t length)
 
 size_t Stream::readBytesUntil(char terminator, char *buffer, size_t length)
 {
-  if (length < 1) return 0;
   size_t index = 0;
   while (index < length) {
     int c = timedRead();

cores/arduino/USBAPI.h

@@ -65,6 +65,8 @@ class USBDevice_
 	void detach();	// Serial port goes down too...
 	void poll();
 	bool wakeupHost(); // returns false, when wakeup cannot be processed
+
+	bool isSuspended();
 };
 extern USBDevice_ USBDevice;
 

cores/arduino/USBCore.cpp

@@ -496,14 +496,13 @@ bool SendConfiguration(int maxlen)
 static
 bool SendDescriptor(USBSetup& setup)
 {
-	int ret;
 	u8 t = setup.wValueH;
 	if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t)
 		return SendConfiguration(setup.wLength);
 
 	InitControl(setup.wLength);
 #ifdef PLUGGABLE_USB_ENABLED
-	ret = PluggableUSB().getDescriptor(setup);
+	int ret = PluggableUSB().getDescriptor(setup);
 	if (ret != 0) {
 		return (ret > 0 ? true : false);
 	}
@@ -855,4 +854,10 @@ bool USBDevice_::wakeupHost()
 	return false;
 }
 
+bool USBDevice_::isSuspended()
+{
+	return (_usbSuspendState & (1 << SUSPI));
+}
+
+
 #endif /* if defined(USBCON) */

cores/arduino/WInterrupts.c

@@ -65,7 +65,6 @@ static volatile voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS] = {
     nothing,
 #endif
 };
-// volatile static voidFuncPtr twiIntFunc;
 
 void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
   if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
@@ -274,11 +273,6 @@ void detachInterrupt(uint8_t interruptNum) {
   }
 }
 
-/*
-void attachInterruptTwi(void (*userFunc)(void) ) {
-  twiIntFunc = userFunc;
-}
-*/
 
 #define IMPLEMENT_ISR(vect, interrupt) \
   ISR(vect) { \
@@ -314,11 +308,3 @@ IMPLEMENT_ISR(INT2_vect, EXTERNAL_INT_2)
 #endif
 
 #endif
-
-/*
-ISR(TWI_vect) {
-  if(twiIntFunc)
-    twiIntFunc();
-}
-*/
-

cores/arduino/new.cpp

@@ -26,6 +26,11 @@ void *operator new[](size_t size) {
   return malloc(size);
 }
 
+void * operator new(size_t size, void * ptr) noexcept {
+  (void)size;
+  return ptr;
+}
+
 void operator delete(void * ptr) {
   free(ptr);
 }

cores/arduino/new.h

@@ -23,6 +23,7 @@
 
 void * operator new(size_t size);
 void * operator new[](size_t size);
+void * operator new(size_t size, void * ptr) noexcept;
 void operator delete(void * ptr);
 void operator delete[](void * ptr);
 

libraries/EEPROM/src/EEPROM.h

@@ -40,7 +40,7 @@ struct EERef{
 
     //Access/read members.
     uint8_t operator*() const            { return eeprom_read_byte( (uint8_t*) index ); }
-    operator const uint8_t() const       { return **this; }
+    operator uint8_t() const             { return **this; }
 
     //Assignment/write members.
     EERef &operator=( const EERef &ref ) { return *this = *ref; }
@@ -89,7 +89,7 @@ struct EEPtr{
     EEPtr( const int index )
         : index( index )                {}
 
-    operator const int() const          { return index; }
+    operator int() const                { return index; }
     EEPtr &operator=( int in )          { return index = in, *this; }
 
     //Iterator functionality.
@@ -143,4 +143,4 @@ struct EEPROMClass{
 };
 
 static EEPROMClass EEPROM;
-#endif
+#endif

libraries/SoftwareSerial/src/SoftwareSerial.h

@@ -111,13 +111,4 @@ class SoftwareSerial : public Stream
   static inline void handle_interrupt() __attribute__((__always_inline__));
 };
 
-// Arduino 0012 workaround
-#undef int
-#undef char
-#undef long
-#undef byte
-#undef float
-#undef abs
-#undef round
-
 #endif

platform.txt

@@ -6,7 +6,7 @@
 # https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5-3rd-party-Hardware-specification
 
 name=Arduino AVR Boards
-version=1.6.22
+version=1.6.23
 
 # AVR compile variables
 # ---------------------
@@ -25,7 +25,7 @@ compiler.c.elf.flags={compiler.warning_flags} -Os -g -flto -fuse-linker-plugin -
 compiler.c.elf.cmd=avr-gcc
 compiler.S.flags=-c -g -x assembler-with-cpp -flto -MMD
 compiler.cpp.cmd=avr-g++
-compiler.cpp.flags=-c -g -Os {compiler.warning_flags} -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto
+compiler.cpp.flags=-c -g -Os {compiler.warning_flags} -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto
 compiler.ar.cmd=avr-gcc-ar
 compiler.ar.flags=rcs
 compiler.objcopy.cmd=avr-objcopy