Skip to content

Commit 2398409

Browse files
cmagliecmaglie
committed
Added SERIAL metadata into variant files.
1 parent 9d48a36 commit 2398409

File tree

6 files changed

+121
-0
lines changed

6 files changed

+121
-0
lines changed

Diff for: ‎variants/ethernet/pins_arduino.h

+18
Original file line numberDiff line numberDiff line change
@@ -215,4 +215,22 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
215215

216216
#endif
217217

218+
// These serial port names are intended to allow libraries and architecture-neutral
219+
// sketches to automatically default to the correct port name for a particular type
220+
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
221+
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
222+
//
223+
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
224+
//
225+
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
226+
//
227+
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
228+
//
229+
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
230+
//
231+
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
232+
// pins are NOT connected to anything by default.
233+
#define SERIAL_PORT_HARDWARE Serial
234+
#define SERIAL_PORT_HARDWARE_OPEN Serial1
235+
218236
#endif

Diff for: ‎variants/leonardo/pins_arduino.h

+21
Original file line numberDiff line numberDiff line change
@@ -335,4 +335,25 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
335335
};
336336

337337
#endif /* ARDUINO_MAIN */
338+
339+
// These serial port names are intended to allow libraries and architecture-neutral
340+
// sketches to automatically default to the correct port name for a particular type
341+
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
342+
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
343+
//
344+
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
345+
//
346+
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
347+
//
348+
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
349+
//
350+
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
351+
//
352+
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
353+
// pins are NOT connected to anything by default.
354+
#define SERIAL_PORT_MONITOR Serial
355+
#define SERIAL_PORT_USBVIRTUAL Serial
356+
#define SERIAL_PORT_HARDWARE Serial1
357+
#define SERIAL_PORT_HARDWARE_OPEN Serial1
358+
338359
#endif /* Pins_Arduino_h */

Diff for: ‎variants/mega/pins_arduino.h

+24
Original file line numberDiff line numberDiff line change
@@ -360,4 +360,28 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
360360

361361
#endif
362362

363+
// These serial port names are intended to allow libraries and architecture-neutral
364+
// sketches to automatically default to the correct port name for a particular type
365+
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
366+
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
367+
//
368+
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
369+
//
370+
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
371+
//
372+
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
373+
//
374+
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
375+
//
376+
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
377+
// pins are NOT connected to anything by default.
378+
#define SERIAL_PORT_MONITOR Serial
379+
#define SERIAL_PORT_HARDWARE Serial
380+
#define SERIAL_PORT_HARDWARE1 Serial1
381+
#define SERIAL_PORT_HARDWARE2 Serial2
382+
#define SERIAL_PORT_HARDWARE3 Serial3
383+
#define SERIAL_PORT_HARDWARE_OPEN Serial1
384+
#define SERIAL_PORT_HARDWARE_OPEN1 Serial2
385+
#define SERIAL_PORT_HARDWARE_OPEN2 Serial3
386+
363387
#endif

Diff for: ‎variants/robot_control/pins_arduino.h

+20
Original file line numberDiff line numberDiff line change
@@ -278,4 +278,24 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = {
278278
};
279279

280280
#endif /* ARDUINO_MAIN */
281+
282+
// These serial port names are intended to allow libraries and architecture-neutral
283+
// sketches to automatically default to the correct port name for a particular type
284+
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
285+
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
286+
//
287+
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
288+
//
289+
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
290+
//
291+
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
292+
//
293+
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
294+
//
295+
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
296+
// pins are NOT connected to anything by default.
297+
#define SERIAL_PORT_MONITOR Serial
298+
#define SERIAL_PORT_USBVIRTUAL Serial
299+
#define SERIAL_PORT_HARDWARE Serial1
300+
281301
#endif /* Pins_Arduino_h */

Diff for: ‎variants/robot_motor/pins_arduino.h

+20
Original file line numberDiff line numberDiff line change
@@ -273,4 +273,24 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = {
273273
};
274274

275275
#endif /* ARDUINO_MAIN */
276+
277+
// These serial port names are intended to allow libraries and architecture-neutral
278+
// sketches to automatically default to the correct port name for a particular type
279+
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
280+
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
281+
//
282+
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
283+
//
284+
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
285+
//
286+
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
287+
//
288+
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
289+
//
290+
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
291+
// pins are NOT connected to anything by default.
292+
#define SERIAL_PORT_MONITOR Serial
293+
#define SERIAL_PORT_USBVIRTUAL Serial
294+
#define SERIAL_PORT_HARDWARE Serial1
295+
276296
#endif /* Pins_Arduino_h */

Diff for: ‎variants/standard/pins_arduino.h

+18
Original file line numberDiff line numberDiff line change
@@ -215,4 +215,22 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
215215

216216
#endif
217217

218+
// These serial port names are intended to allow libraries and architecture-neutral
219+
// sketches to automatically default to the correct port name for a particular type
220+
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
221+
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
222+
//
223+
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
224+
//
225+
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
226+
//
227+
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
228+
//
229+
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
230+
//
231+
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
232+
// pins are NOT connected to anything by default.
233+
#define SERIAL_PORT_MONITOR Serial
234+
#define SERIAL_PORT_HARDWARE Serial
235+
218236
#endif

0 commit comments

Comments
 (0)