update arduino_tinyusb dcd

Author: me-no-dev

components/arduino_tinyusb/CMakeLists.txt

@@ -26,9 +26,9 @@ if(CONFIG_TINYUSB_ENABLED)
       "${COMPONENT_DIR}/include")
   set(srcs
       # espressif:
-      "${COMPONENT_DIR}/src/dcd_esp32s2.c"
+      "${COMPONENT_DIR}/src/dcd_esp32sx.c"
       # tusb:
-      #"${COMPONENT_DIR}/tinyusb/src/portable/espressif/esp32s2/dcd_esp32s2.c"
+      #"${COMPONENT_DIR}/tinyusb/src/portable/espressif/esp32sx/dcd_esp32sx.c"
       "${COMPONENT_DIR}/tinyusb/src/class/cdc/cdc_device.c"
       "${COMPONENT_DIR}/tinyusb/src/class/hid/hid_device.c"
       "${COMPONENT_DIR}/tinyusb/src/class/midi/midi_device.c"

components/arduino_tinyusb/src/dcd_esp32s2.c renamed to components/arduino_tinyusb/src/dcd_esp32sx.c

@@ -27,16 +27,15 @@
  */
 
 #include "tusb_option.h"
-#include "common/tusb_fifo.h"
 
-#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 && TUSB_OPT_DEVICE_ENABLED
+#if (((CFG_TUSB_MCU == OPT_MCU_ESP32S2) ||  (CFG_TUSB_MCU == OPT_MCU_ESP32S3)) && TUSB_OPT_DEVICE_ENABLED)
 
 // Espressif
 #include "driver/periph_ctrl.h"
 #include "freertos/xtensa_api.h"
 #include "esp_intr_alloc.h"
 #include "esp_log.h"
-#include "esp32s2/rom/gpio.h"
+#include "driver/gpio.h"
 #include "soc/dport_reg.h"
 #include "soc/gpio_sig_map.h"
 #include "soc/usb_periph.h"
@@ -299,6 +298,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_edpt)
   uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress);
   uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress);
 
+  TU_ASSERT(desc_edpt->wMaxPacketSize.size <= 64);
   TU_ASSERT(epnum < EP_MAX);
 
   xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, dir);
@@ -932,5 +932,5 @@ void dcd_int_disable (uint8_t rhport)
   esp_intr_free(usb_ih);
 }
 
-#endif // OPT_MCU_ESP32S2
+#endif // #if OPT_MCU_ESP32S2 || OPT_MCU_ESP32S3